HVAC & Plumbing Services in Shaker Heights

Performed scheduled maintenance on 4-year-old furnace under Home Plan Heating Tune Up service. Inspected interior components including blower motor, electrical connections, and PVC venting system. All systems functioning properly with no issues identified; unit is operating within manufacturer specifications.

Performed scheduled maintenance on two heating systems. Inspected furnace components including heat exchanger, burner assembly, gas valve, and blower motor, with all connections and wiring verified. Conducted combustion analysis testing showing proper operation with O2 at 13.7% and CO2 at 4.1%, confirming system efficiency and safe operation.

Performed 8-12 heating maintenance under Home Plan Heating Tune Up service. Conducted combustion analysis with readings of 12.0% O2, 28 PPM CO, and 4.7% CO2 at operating temperature of 86.7°F, confirming system is operating within safe parameters.

Responded to a service call for a boiler installed in September with a leaking supply line. Identified water leakage at the connection point between PVC and metal fitting, evidenced by water staining on the concrete floor. Placed collection bucket to prevent further water damage while completing necessary repairs to the compromised joint.

Performed scheduled maintenance on 8-year-old MVP steam boiler system. Inspected copper piping and T-junction valve assembly for proper operation. Evaluated main boiler unit, checked control panels, and examined all connection points; placed collection buckets to capture minor condensation during service.

Performed scheduled maintenance on tankless water heater, including complete descaling procedure as per manufacturer recommendations. Installed temporary bypass system using metal-braided hoses and collection bucket for proper circulation of descaling solution. Also completed routine maintenance on boiler system, checking all control valves and confirming proper operation of both systems.

Performed scheduled maintenance on residential boiler system. Inspected burner assembly and found significant rust/oxidation on heat exchanger fins. Completed standard cleaning and operational testing to ensure proper functionality despite visible wear on components.

Responded to service call for 3.5-year-old natural gas steam boiler system where the pressure reducing valve was actively leaking, requiring shutdown which affected heating to half of the residence. Inspected the brass pressure regulator valve assembly and surrounding copper piping configuration. Replaced faulty reducing valve, restoring proper system pressure and full heating functionality throughout the home.

Successfully rerouted steam radiator return line adjacent to basement window, ensuring proper system flow while maintaining clearance from the window opening. Installation included proper insulation of all exposed ducts and securing connections to existing HVAC infrastructure.

Conducted whole home plumbing inspection with focus on water heater system. Examined water heater unit, including connections to copper piping, ventilation duct, and safety components. Unit appears to be properly installed on concrete pad with appropriate clearances and venting.

Performed scheduled maintenance on natural gas heating system. Inspected burner assembly which showed proper blue flame operation but observed significant rust and corrosion on heat exchanger components. System is operational but showing signs of age-related deterioration that should be monitored in future service visits.

Performed tune-up maintenance service on two heating systems: a furnace with Silent Pilot control board and a boiler system with associated plumbing. Visual inspection of both units confirmed proper installation of components including wiring, gas valve assembly, heat exchanger, pressure gauge, and various piping connections.

Completed initial phase of multi-stage steam radiator relocation project, removing and preparing to reinstall two radiators from 2nd floor bedroom and 3rd floor bathroom to adjacent rooms. Accessed and evaluated concealed steam line in wall between dining room and kitchen, requiring further assessment once demolition is complete. Relocated cooling thermostat in dining room to adjacent wall and documented exposed subfloor structure and ceiling cavity to prepare for subsequent pipe modifications.

Responded to no-heat service call for 5-year-old thermostat issue. Upon inspection, discovered significant sediment buildup in the boiler system with visible rust accumulation in the sight glass. Found active leak requiring containment with collection bucket; performed system flush and replaced corroded pipe section to restore proper heating function.

Performed a flush service on a 7-year-old 75-gallon Bradford White water heater due to customer's report of rapidly diminishing hot water supply. Completed full system flush to remove sediment buildup and inspected all connections and valves for proper operation. Service addressed the performance issue while maintaining the existing plumbing infrastructure in the basement utility area.

Performed annual maintenance on boiler and furnace system. Conducted combustion analysis using UEi analyzer, confirming proper O2 (12.4%), CO2 (4.9%), and CO (20ppm) levels. Inspected heat exchanger, electrical connections, and verified proper operation of all components including condensate system and burner assembly.

Conducted comprehensive assessment of HVAC system with uneven heat distribution throughout residence. Inspected existing ventilation components, noting absence of individual vent control valves and lack of proper labeling. Documented condition of multiple vents showing signs of wear and deterioration, with recommendation for replacement and installation of adjustable dampers to facilitate balanced airflow management.

Responded to no-heat call for garage heating system. Diagnostic inspection revealed functioning control board with normal blue LED indicator lights. Confirmed proper operation of exterior wall vent with no obstruction. System restored to normal operation after cleaning and adjustment.

Performed comprehensive heating tune-up on residential furnace system. Conducted electrical diagnostics using Fieldpiece clamp meter to verify proper voltage/amperage at control boards and blower assembly. Measured supply air temperature (61.5°F) with ThermPro digital thermometer, indicating system is operating within normal parameters.

Responded to no-heat call for 8-year-old steam boiler. Inspected system and identified oxidation on copper piping connections. Performed maintenance service, checked pressure levels, and restored proper operation of heating system.