With five generations of knowledge, Verne & Ellsworth Hann has provided our clients in Shaker Heights with outstanding customer service. When you need trained HVAC technicians or certified plumbing services, you can count on Verne & Ellsworth.
Northeast Ohio’s Heating, Air Conditioning, Boilers, Plumbing experts. If you’re having problems with your HVAC or plumbing, contact us today!
Reliable Heating Replacement & Repair
The average winter temperature for Shaker Heights is 36 degrees. When the weather is that cold, you need to know you can count on your heating unit to do its job. Inevitably, heating units will break down, but you can always count on Verne & Ellsworth for reliable heating services. We can install, replace, repair, and maintain your home’s heating unit.Â
Our qualified heating technicians have decades of experience with:
- Gas and electric furnaces: These are tried and tested methods for keeping your home warm. With reliable fuel sources and the ability to share your AC’s existing ductwork, a furnace is a fantastic option for heating your home.
- Boilers: Boilers heat the home by boiling water, piped throughout to radiate heat into the air. This centuries-old device uses one of the most reliable methods around.
- Heat pumps: Heat pumps are a modern way to heat your home. They work without external heat sources, such as furnaces and boilers, and can pull heat from the air, ground, or a nearby water source.Â
Comprehensive Cooling & AC Services
When the humidity spikes and the temperature approaches 90 degrees, it’s no time for your AC to stop. No matter the issue, you can count on Verne & Ellsworth for trustworthy cooling services. Our certified AC technicians can install, replace, repair, and maintain your home’s AC unit.
We have decades of knowledge in:
- Ductless mini-splits: A ductless mini-split gives you complete control over your home’s temperature without the cumbersome ductwork of traditional units. A ductless mini-split cools your home through an individual unit mounted to the wall in each room.
- High-velocity ACs: High-velocity AC units are a perfect option for historic homes in the Shaker Heights area. Instead of ductwork, they use small, flexible tubing to pipe air throughout your home.
Air Quality & Ductwork Services in Shaker Heights
The air quality in your home has a significant impact on your health and well-being. This is why Verne & Ellsworth is proud to work with units such as:
- Air scrubbers and cleaners: These units keep the air free of germs and allergens, keeping your lungs happy and healthy.
- Carbon monoxide detection: These can be life-saving devices for those using gas or oil furnaces.
- Whole-house humidifiers: Dry air pulls moisture from anywhere it can. Protect your home, furniture, and skin with a whole-house humidifier.
- Whole-house dehumidifiers: Too much moisture in the air can lead to mildew and mold issues. A dehumidifier is an easy way to prevent this.Â
Top-Rated Plumbing Services
Malfunctioning plumbing is a fast way to ruin your day. You can count on Verne & Ellsworth when you need qualified plumbing services. We’ll keep your plumbing running smoothly with such services as:
- Water heaters: We can install or repair your traditional or tankless water heaters.
- Water lines: We can install or repair your water lines to keep your potable water flowing.Â
- Gas lines: We can pipe, repair, and test your gas lines to ensure your home’s safety.
- Drain snaking: We’ll keep your home draining smoothly, removing any pesky clogs you may face.
Schedule With Verne & Ellsworth Hann in Shaker Heights
One of the oldest family-run businesses in the area, Verne & Ellsworth has won the Angi Super Service Award and the Best of the Heights Award. We are committed to outstanding customer service, professionalism, and integrity. When our licensed and insured technicians set foot on your property, you can rest assured the job will be done right.
Contact our team today to request a free estimate or to schedule services in Shaker Heights.
Verne and Ellsworth Hann has completed 20 jobs in Shaker Heights, OH in January 2026. The most recent job was on January 16, 2026. Verne and Ellsworth Hann has completed 890 jobs in Shaker Heights, OH in the last 12 months.Recent Jobs and Reviews in Shaker Heights, OH
Shaker Heights, OH at a glance
Job Locations and Reviews
Performed scheduled preventive maintenance on boiler and furnace systems. Inspected blower wheel assembly for dust accumulation and proper operation. Documented water heater installation details including Rheem Performance unit with appropriate copper pipe connections and insulation.
Performed initial assessment of customer's plumbing concerns involving 3 drains and multiple water lines. Inspected basement utility area showing evidence of previous water damage with deteriorated concrete flooring and wall sections. Documented current condition of plumbing infrastructure to prepare comprehensive estimate for requested repairs.
Responded to service call regarding sewer gas odor emanating from basement floor drain. Upon inspection, removed drain cover to reveal significant corrosion and deterioration around the drain opening. Cleaned drain pipe and surrounding area to eliminate the source of the offensive smell.
Responded to no heat call for 15-year-old furnace system. Diagnostic inspection revealed significant dust buildup on inducer motor components and signs of corrosion on heat exchanger. Performed comprehensive cleaning of inducer assembly to restore proper airflow and functionality. System now operating within normal parameters with restored heat output.
Performed scheduled maintenance on dual boiler heating system (main house and garage snow melt system). Documented leaking pump with comprehensive photos of the volute and motor assembly for Armstrong warranty claim consideration. Inspected steam humidifier functionality as requested and verified proper operation of both heating systems.
Performed routine heating maintenance on three HVAC systems. Serviced both attic-mounted and utility closet furnaces, checking all components for proper operation. Inspected ductwork integrity, verified proper insulation on all lines, and confirmed systems were operating within manufacturer specifications.
Performed diagnostic inspection on 20-year-old furnace with reported cracked heat exchanger and overheating issues. Visual assessment confirmed aging unit with deterioration and internal component wear. Provided customer with replacement options for 90,000-100,000 BTU two-stage furnace system with humidifier, and included additional quote for AC replacement though not immediately critical.
Performed maintenance service on 10+ year old Goodman furnace. Conducted combustion analysis with C161 analyzer, confirming proper operation with temperatures reaching 310.9°F. Inspected heat exchanger and verified all electrical connections were secure and properly bundled.
Performed annual furnace maintenance service. Conducted combustion analysis with digital analyzer showing initial readings of O2 at 11.6%, CO at 22ppm, and CO2 at 5.3% at 75.9°F. After adjustments, final readings improved to O2 at 8.0%, CO at 46ppm, and CO2 at 7.4% at 86.5°F, confirming proper combustion and safe operation.
Successfully replaced deteriorated wet return piping for recently installed boiler system. Accessed pipes by opening section of old sauna wall, revealing significant moisture damage to surrounding materials. Installed new copper return lines with proper elbow joints to ensure optimal boiler operation.
Performed scheduled heating tune-up under Home Plan on two furnace systems. Inspected burner assemblies, flame patterns, and gas valve operations, confirming proper ignition sequence. Examined all electrical connections and control modules, ensuring all wiring was secure and properly terminated. Both systems are operating within manufacturer specifications with no immediate concerns noted.
Inspected HVAC system with water leak originating from improperly installed humidifier without adequate drainage for emergency pan. Consulted with Dale Salo regarding proposed solution to replace damaged humidifier and modify drain pan configuration by raising it to connect with dedicated condensate pump. Noted that complete resolution of all drainage issues would require full equipment replacement.
Performed scheduled heating tune-up on HP furnace system. Conducted combustion analysis using Fieldpiece C161 analyzer, confirming proper operation with safe readings (O2: 17.4%, CO: 0 PPM, CO2: 2.0%). Inspected burner assembly, verified clean blue flame pattern indicating efficient combustion with no safety concerns.
Conducted site visit to assess two existing 75-gallon A.O. Smith water heaters for replacement. Documented current installation including copper piping connections and mechanical room layout. Will provide customer with estimate for new units and recommended add-on options as discussed with J.M.K.
Performed scheduled maintenance on dual furnace systems. Inspected and verified operation of control components including sensor unit with status indicators. Examined ductwork connections and pressure systems, confirming proper installation and functionality of all HVAC components.
Completed replacement of check valve and cap on recirculation loop for customer Carmen's water heater system. Conducted thorough testing of installation to ensure proper functionality and system performance. All work was completed as scheduled with customer confirmation.
Diagnosed 1-year old Lochimar water heater reporting no hot water. Inspection revealed faulty thermocouple preventing proper ignition. Replaced thermocouple, verified proper ignition sequence, and confirmed hot water supply restored. Unit now functioning according to manufacturer specifications.
Performed heating tune-up on home plan service agreement. Inspected furnace with focus on burner assembly and heat exchanger. Verified proper flame pattern with strong blue flame combustion. All controls and wiring connections were checked and confirmed operational.
Conducted heating maintenance on two residential units under Home Plan service agreement. Performed complete system inspection including burner assembly verification with proper blue flame pattern observed. Combustion analysis testing showed optimal readings with 0 PPM carbon monoxide, 3.0% CO2, and temperature at 92.5°F, confirming system efficiency and safe operation.
Completed boiler tune-up service that was previously rescheduled. Inspected burner tubes and heating assembly, noting minor corrosion and rust formation on main horizontal pipe. Visual inspection confirmed operational status of ignition system with functioning indicator light.
