HVAC & Plumbing Services in Solon, OH

Completed routine maintenance on 6-year-old Bryant air conditioning system. Performed comprehensive inspection of outdoor condensing unit, verified proper operation of compressor and condenser fan motor, checked refrigerant line connections and insulation integrity, and confirmed system is functioning within manufacturer specifications.

Completed scheduled cooling system tune-up on 6-year-old HVAC unit. Performed comprehensive maintenance inspection, replaced heavily soiled air filters with new units as evidenced by significant dust and debris accumulation on original filters, and verified system operational parameters meet manufacturer specifications.

Completed plumbing installation for kitchen remodel, installing new supply lines with shut-off valve assembly under cabinet. Installed insulated refrigerant line and connected water supply piping with brass valve featuring accessible shut-off control for future maintenance access.

Performed routine maintenance on a 3-year-old mini split air conditioning system. System was operating properly with no reported issues or symptoms. Completed standard AC tune-up procedures including inspection, cleaning, and performance verification to ensure continued efficient operation.

Completed routine AC tune-up on 3-year-old system operating without issues. Performed standard maintenance procedures including inspection of all components, verification of proper operation, and system performance evaluation. Unit found to be functioning within normal parameters with no corrective actions required.

Responded to service call for clogged toilet. Upon arrival, inspected toilet and associated plumbing components including angle stop valve and internal tank mechanisms. Successfully cleared the toilet obstruction and verified proper water flow and flush operation. All plumbing fixtures, including chrome angle stop valve and internal fill valve assembly, were inspected and confirmed to be functioning correctly with no leaks detected.

Conducted comprehensive HVAC system evaluation following multiple service calls for inadequate cooling performance. Assessed existing furnace, ductwork configuration, and outdoor condensing unit installation beneath structure. Documented current equipment condition including vertical furnace unit with connected metal ductwork, venting system, and copper refrigerant line set routing through crawl space area. Provided detailed replacement estimate for complete system upgrade to address ongoing cooling deficiencies and restore proper climate control functionality.

Performed complete blower assembly service on HVAC system. Removed squirrel cage blower wheel from unit, thoroughly cleaned accumulated dust and debris from all blades and housing components, and reassembled system to manufacturer specifications. Unit tested and restored to proper operation upon completion.

Responded to service call for leaking washing machine valve. Upon arrival, accessed the recessed plumbing panel and performed diagnostic inspection of the water supply connections. Identified active leak at one of the washing machine shut-off valves. Inspected both hot and cold water supply valves with cross-handle controls and the braided stainless steel supply lines. Noted significant rust and corrosion on the metal backing plate within the access panel, indicating prolonged moisture exposure from the leaking valve. Documented existing conditions with photographs showing the extent of corrosion damage and current plumbing configuration including supply valves, flexible supply lines, and corrugated drain hose installation.

Responded to cooling complaint on system with previous service history from May and mid-June. Connected digital manifold gauges to unit and performed comprehensive diagnostic testing of refrigerant pressures and temperatures to identify cause of inadequate cooling performance. Documented readings and system conditions for warranty evaluation and further troubleshooting of recurring issue.

Completed comprehensive AC tune-up on outdoor condensing unit with undetermined age. Performed standard maintenance protocol including inspection of all major components, electrical connections, refrigerant levels, and system operation. Unit found to be operating within normal parameters with no deficiencies noted; all systems functioning properly upon completion of service.

Responded to service call for faulty expansion tank on residential water heater system. Upon arrival, inspected A.O. Smith tanked water heater unit and confirmed expansion tank had failed and required replacement. Shut off water supply using existing shut-off valve and relieved system pressure. Removed old expansion tank from wall-mounted position using copper strapping brackets. Installed new expansion tank, securing it horizontally to concrete block wall with appropriate mounting hardware. Connected expansion tank to hot water system via copper piping, ensuring proper orientation and secure soldered joints. Verified all connections for leaks and proper operation. Restored water supply and brought system back online. Tested expansion tank function and confirmed proper pressure relief capability. System operating normally with new expansion tank properly absorbing thermal expansion from water heater.

Completed routine cooling system tune-up on residential air conditioning unit. Performed comprehensive inspection of outdoor condenser unit, checked refrigerant levels, cleaned coils, verified electrical connections and disconnect box functionality, and tested overall system operation. Unit found to be in satisfactory working condition with no issues identified.

Responded to service call for non-operational air conditioning system at residential property. Upon arrival, performed comprehensive diagnostic evaluation of outdoor condensing unit, which appeared to be a cylindrical configuration with vertical fin design. Conducted visual inspection of electrical connections, disconnect box, and meter assembly mounted on exterior wall. Assessed condenser pad placement and gravel base for proper drainage and levelness. Documented equipment condition through photographic records showing unit positioning, electrical service connections, and overall installation setup. System evaluation completed and findings communicated to property occupant.

Completed bathtub faucet replacement including installation of new tub spout and shower diverter valve with decorative black escutcheon plate. Accessed plumbing through wall opening to replace copper supply lines and ensure proper water flow to fixtures.

Completed dual air conditioning estimate for basement mechanical room installation. Assessed existing HVAC system configuration including furnace unit, air handler cabinet, ductwork connections, and associated electrical components. Documented current equipment layout, clearances, and utility connections to provide comprehensive replacement recommendations for two AC units.

Responded to emergency service call for shower faucet that could not be shut off. Upon arrival, assessed the shower valve assembly and successfully repaired the malfunctioning shutoff mechanism, restoring proper water control to the fixture. Documented existing tile damage near the faucet installation and floor drain condition for customer records.

Completed annual air conditioning tune-up and inspection on residential cooling system. Performed comprehensive diagnostic testing using digital manifold gauges to measure system pressures and temperatures, confirming proper refrigerant charge and operational parameters. All components found functioning within normal specifications with no deficiencies noted.

Performed comprehensive air conditioning tune-up on six-year-old system with no reported issues. Completed full maintenance inspection including evaporator coil examination, verified proper airflow across heat exchanger fins, and inspected refrigerant lines and connections. All components found in good working condition with no signs of corrosion or debris accumulation.

Completed annual cooling system maintenance on an eight-year-old residential air conditioning unit, model NXA442GKC101, utilizing R410A refrigerant. Performed comprehensive pre-season tune-up including system inspection, verified electrical specifications at 208-230 volts AC with proper amperage draw, confirmed refrigerant charge levels within manufacturer specifications, and documented equipment nameplate data for service records. No deficiencies identified; system operating within normal parameters and ready for seasonal use.