With five generations of knowledge, Verne & Ellsworth Hann has provided our clients in Shaker Heights with outstanding customer service. When you need trained HVAC technicians or certified plumbing services, you can count on Verne & Ellsworth.
Northeast Ohio’s Heating, Air Conditioning, Boilers, Plumbing experts. If you’re having problems with your HVAC or plumbing, contact us today!
Reliable Heating Replacement & Repair
The average winter temperature for Shaker Heights is 36 degrees. When the weather is that cold, you need to know you can count on your heating unit to do its job. Inevitably, heating units will break down, but you can always count on Verne & Ellsworth for reliable heating services. We can install, replace, repair, and maintain your home’s heating unit.Â
Our qualified heating technicians have decades of experience with:
- Gas and electric furnaces: These are tried and tested methods for keeping your home warm. With reliable fuel sources and the ability to share your AC’s existing ductwork, a furnace is a fantastic option for heating your home.
- Boilers: Boilers heat the home by boiling water, piped throughout to radiate heat into the air. This centuries-old device uses one of the most reliable methods around.
- Heat pumps: Heat pumps are a modern way to heat your home. They work without external heat sources, such as furnaces and boilers, and can pull heat from the air, ground, or a nearby water source.Â
Comprehensive Cooling & AC Services
When the humidity spikes and the temperature approaches 90 degrees, it’s no time for your AC to stop. No matter the issue, you can count on Verne & Ellsworth for trustworthy cooling services. Our certified AC technicians can install, replace, repair, and maintain your home’s AC unit.
We have decades of knowledge in:
- Ductless mini-splits: A ductless mini-split gives you complete control over your home’s temperature without the cumbersome ductwork of traditional units. A ductless mini-split cools your home through an individual unit mounted to the wall in each room.
- High-velocity ACs: High-velocity AC units are a perfect option for historic homes in the Shaker Heights area. Instead of ductwork, they use small, flexible tubing to pipe air throughout your home.
Air Quality & Ductwork Services in Shaker Heights
The air quality in your home has a significant impact on your health and well-being. This is why Verne & Ellsworth is proud to work with units such as:
- Air scrubbers and cleaners: These units keep the air free of germs and allergens, keeping your lungs happy and healthy.
- Carbon monoxide detection: These can be life-saving devices for those using gas or oil furnaces.
- Whole-house humidifiers: Dry air pulls moisture from anywhere it can. Protect your home, furniture, and skin with a whole-house humidifier.
- Whole-house dehumidifiers: Too much moisture in the air can lead to mildew and mold issues. A dehumidifier is an easy way to prevent this.Â
Top-Rated Plumbing Services
Malfunctioning plumbing is a fast way to ruin your day. You can count on Verne & Ellsworth when you need qualified plumbing services. We’ll keep your plumbing running smoothly with such services as:
- Water heaters: We can install or repair your traditional or tankless water heaters.
- Water lines: We can install or repair your water lines to keep your potable water flowing.Â
- Gas lines: We can pipe, repair, and test your gas lines to ensure your home’s safety.
- Drain snaking: We’ll keep your home draining smoothly, removing any pesky clogs you may face.
Schedule With Verne & Ellsworth Hann in Shaker Heights
One of the oldest family-run businesses in the area, Verne & Ellsworth has won the Angi Super Service Award and the Best of the Heights Award. We are committed to outstanding customer service, professionalism, and integrity. When our licensed and insured technicians set foot on your property, you can rest assured the job will be done right.
Contact our team today to request a free estimate or to schedule services in Shaker Heights.
Verne and Ellsworth Hann has completed 20 jobs in Shaker Heights, OH between January 2026 and February 2026. The most recent job was on February 4, 2026. Verne and Ellsworth Hann has completed 890 jobs in Shaker Heights, OH in the last 12 months.Recent Jobs and Reviews in Shaker Heights, OH
Shaker Heights, OH at a glance
Job Locations and Reviews
Performed annual maintenance inspection on 1-year-old boiler system. Examined backflow preventer, pressure regulator valve, and all copper pipe connections for proper function and signs of leakage. Inspected boiler unit, flue pipe, and PVC venting system, confirming all components are in good working order with no visible issues.
Performed scheduled boiler tune-up service. Inspected heat exchanger fins and burner assembly, confirming proper flame pattern with characteristic blue color indicating efficient combustion. All components were found to be in functional working condition.
Performed diagnostic assessment of 15-year-old furnace system showing significant deterioration. Inspection revealed worn ductwork connections and aging control components including Honeywell thermostat panel. Recommended full system replacement due to unit age, declining efficiency, and potential safety concerns.
Performed annual steam boiler maintenance service, including inspection and testing of the burner assembly. Observed proper flame pattern and combustion in the heat exchanger ports. System is currently operational with no immediate issues requiring repair.
Performed scheduled maintenance on steam boiler system. Inspected circulation pump assembly mounted on wooden backboard and examined Honeywell control box connections. Checked valve operation and inspected copper piping configuration for proper functionality and signs of corrosion.
Performed furnace tune-up and preventative maintenance service. Conducted electrical diagnostics with multimeter showing 35.47V reading and verified heat exchanger temperature at 68.2°C, confirming system is operating within normal parameters.
Responded to a no-heat call following previous service by Jeff who had identified a loose wire. Located and secured disconnected control wire at circuit board, restoring furnace operation. Verified proper ignition sequence and confirmed all burners displaying strong, consistent blue flame pattern across all tubes, indicating complete combustion and proper gas valve operation.
Responded to no-heat call for 15-year-old furnace system. Performed full diagnostic inspection of the unit and ductwork connections. Identified and replaced worn ignitor component that was preventing proper startup sequence. System now operating at normal efficiency with restored heat function.
Performed comprehensive heating system diagnostic on customer's boiler and furnace. Conducted temperature measurements (77.7°F) and electrical testing with multimeter showing 1.45A current draw during operation. System functioning within normal parameters after maintenance service.
Performed standard furnace maintenance which revealed a severely clogged air filter with significant dust and debris accumulation, restricting proper airflow. Replaced the contaminated filter and verified system operation with temperature readings (63.6°F), restoring optimal system efficiency and preventing potential airflow restrictions.
Performed annual inspection on a Burnham G210-S/N-6 CON boiler (S/N: H84-1022) with 175,000 BTU/HR heating capacity. Inspected heat exchanger tubes and burner assembly, noting normal wear consistent with equipment age. System is functioning properly with no safety concerns identified.
Diagnosed and serviced non-functioning furnace; identified faulty control module with visible ON/OFF switch as source of heating failure. Replaced defective control board and verified all wiring connections (red, yellow, green, white) were properly secured. System now operational with normal heat output.
Responded to no-heat call for garage furnace. Diagnosed issue with extinguished pilot light. Successfully relit pilot, confirmed proper flame characteristics and verified normal system operation. Unit is now functioning correctly with adequate heat output.
Performed scheduled maintenance on 12-year-old MVP gas furnace. Conducted combustion analysis with readings of CO2 6.5%, O2 9.6%, and efficiency rating of 92.4%. Temperature measurements showed 112.1°F at primary sensor. Additional pressure differential testing completed with HT-1890 meter showing 1.72 reading. System operating within manufacturer specifications.
Replaced faulty control board in furnace that was preventing heating operation. Upon installation of new board, verified proper ignition sequence with all five burners lighting with strong blue flame. System now cycling correctly and providing heat as designed.
Performed scheduled heating maintenance on gas furnace system. Inspected gas valve control assembly and verified proper functioning of burner ignition with blue flame indication. All wiring connections were examined and confirmed to be secure with no signs of damage or deterioration.
Responded to service call for furnace with burning plastic smell. Upon inspection of heat exchanger and internal components, found damaged plastic connector causing the burning odor. Replaced faulty wiring connector and verified proper operation of all electrical connections. System now functioning normally with no unusual odors during operation.
Performed routine maintenance on 7-year-old MVP gas furnace. Conducted combustion analysis testing with readings of CO2 at 8.0%, efficiency loss at 11.0%, and excess air at 49.0%. System is functioning within acceptable parameters and scheduled for next maintenance.
Completed replacement of two ventilation registers - one on the second floor and one on the third floor. Installed new customizable vents that allow for airflow adjustment through variable aperture sizing. Verified proper installation and operation of both units with existing radiator system remaining in place.
Completed installation of dual 50-gallon, 50K BTU water heater system with two T-5 expansion tanks, drain pans, and 1" water lines. Installation included isolation valves for expansion tanks, anode rods, mixing valves, and a standard air purge. All copper piping connections were properly fitted with appropriate shut-off valves, and the ventilation system was installed with galvanized steel ductwork.
