With five generations of knowledge, Verne & Ellsworth Hann has provided our clients in Shaker Heights with outstanding customer service. When you need trained HVAC technicians or certified plumbing services, you can count on Verne & Ellsworth.
Northeast Ohio’s Heating, Air Conditioning, Boilers, Plumbing experts. If you’re having problems with your HVAC or plumbing, contact us today!
Reliable Heating Replacement & Repair
The average winter temperature for Shaker Heights is 36 degrees. When the weather is that cold, you need to know you can count on your heating unit to do its job. Inevitably, heating units will break down, but you can always count on Verne & Ellsworth for reliable heating services. We can install, replace, repair, and maintain your home’s heating unit.Â
Our qualified heating technicians have decades of experience with:
- Gas and electric furnaces: These are tried and tested methods for keeping your home warm. With reliable fuel sources and the ability to share your AC’s existing ductwork, a furnace is a fantastic option for heating your home.
- Boilers: Boilers heat the home by boiling water, piped throughout to radiate heat into the air. This centuries-old device uses one of the most reliable methods around.
- Heat pumps: Heat pumps are a modern way to heat your home. They work without external heat sources, such as furnaces and boilers, and can pull heat from the air, ground, or a nearby water source.Â
Comprehensive Cooling & AC Services
When the humidity spikes and the temperature approaches 90 degrees, it’s no time for your AC to stop. No matter the issue, you can count on Verne & Ellsworth for trustworthy cooling services. Our certified AC technicians can install, replace, repair, and maintain your home’s AC unit.
We have decades of knowledge in:
- Ductless mini-splits: A ductless mini-split gives you complete control over your home’s temperature without the cumbersome ductwork of traditional units. A ductless mini-split cools your home through an individual unit mounted to the wall in each room.
- High-velocity ACs: High-velocity AC units are a perfect option for historic homes in the Shaker Heights area. Instead of ductwork, they use small, flexible tubing to pipe air throughout your home.
Air Quality & Ductwork Services in Shaker Heights
The air quality in your home has a significant impact on your health and well-being. This is why Verne & Ellsworth is proud to work with units such as:
- Air scrubbers and cleaners: These units keep the air free of germs and allergens, keeping your lungs happy and healthy.
- Carbon monoxide detection: These can be life-saving devices for those using gas or oil furnaces.
- Whole-house humidifiers: Dry air pulls moisture from anywhere it can. Protect your home, furniture, and skin with a whole-house humidifier.
- Whole-house dehumidifiers: Too much moisture in the air can lead to mildew and mold issues. A dehumidifier is an easy way to prevent this.Â
Top-Rated Plumbing Services
Malfunctioning plumbing is a fast way to ruin your day. You can count on Verne & Ellsworth when you need qualified plumbing services. We’ll keep your plumbing running smoothly with such services as:
- Water heaters: We can install or repair your traditional or tankless water heaters.
- Water lines: We can install or repair your water lines to keep your potable water flowing.Â
- Gas lines: We can pipe, repair, and test your gas lines to ensure your home’s safety.
- Drain snaking: We’ll keep your home draining smoothly, removing any pesky clogs you may face.
Schedule With Verne & Ellsworth Hann in Shaker Heights
One of the oldest family-run businesses in the area, Verne & Ellsworth has won the Angi Super Service Award and the Best of the Heights Award. We are committed to outstanding customer service, professionalism, and integrity. When our licensed and insured technicians set foot on your property, you can rest assured the job will be done right.
Contact our team today to request a free estimate or to schedule services in Shaker Heights.
Verne and Ellsworth Hann has completed 20 jobs in Shaker Heights, OH in February 2026. The most recent job was on February 9, 2026. Verne and Ellsworth Hann has completed 890 jobs in Shaker Heights, OH in the last 12 months.Recent Jobs and Reviews in Shaker Heights, OH
Shaker Heights, OH at a glance
Job Locations and Reviews
Performed routine maintenance service on 20+ year old natural gas steam boiler. Inspected heat exchanger showing normal aging with some rust and soot accumulation. Cleaned accessible components and verified proper operation of system.
Performed scheduled furnace tune-up service and identified moderate corrosion on internal piping components. Inspected electrical connections and wiring harness, noting proper secure fastening with zip ties. Provided customer education on whole home air purifier maintenance procedures as requested.
Responded to no heat call for natural gas boiler. Inspected burner assembly and found system operational with proper blue flame pattern across all burner tubes. Verified ignition sequence and flame sensor operation. System is now functioning normally with no further issues detected.
Inspected leaking stack behind recently installed boiler. Observed significant corrosion and water damage at connection points of cast iron waste pipe and copper supply lines. Documented evidence of ceiling water staining and pipe deterioration, recommending complete replacement of affected section to prevent further leakage and structural damage.
Performed scheduled maintenance on 23-year-old steam boiler. Conducted combustion analysis with readings showing optimal oxygen levels (21.0%), zero carbon monoxide (0 PPM), and normal operating temperature (76.7°F). Inspected heat exchanger components and verified proper condition of internal fins and piping.
Replaced malfunctioning low water cutoff on client's boiler system with new VAT Programmable Water Feeder. Client had been manually filling the boiler prior to repair; new digital control system now properly regulates water levels automatically.
Performed scheduled heating maintenance on 6-year-old Carrier furnace under Home Plan agreement. Inspected burner assembly and verified proper ignition with blue flame pattern. Examined electrical connections, control board, and gas valve for proper operation. System functioning normally with no issues identified.
Performed annual inspection on heating system. Verified proper combustion with blue flames visible at burner assembly. Noted minor wall cracking near unit mounting hardware but confirmed system is operating within specifications.
Responded to no heat complaint on first floor of residence with 5-year-old Bryant furnace. Discovered faulty IPOWER fan speed controller affecting proper airflow distribution to first floor. Replaced control device and verified proper operation of system with balanced airflow to all zones.
Performed routine maintenance on 16-year-old and 10-year-old heating furnaces per home plan agreement. Inspected flame sensor and sight glass for proper burner operation, confirming normal blue flame pattern. Checked and verified proper operation of ignition system and control board connections.
Performed scheduled tune-up service on Bryant furnace system located in basement mechanical room. Inspected and cleaned components, checked all connections, and verified proper system operation. Unit is functioning within normal parameters with no immediate concerns noted.
Performed annual furnace maintenance on Lennox heating system. Conducted electrical diagnostic testing with UEi meter to verify proper operation of components and connections. System is currently operational, but customer needs to renew maintenance plan for future coverage.
Responded to no heat complaint at residential property. Upon inspection of the furnace, observed failure of the inducer motor assembly. Replaced faulty component, tested system operation through multiple heating cycles, and verified proper airflow throughout the home. Unit now functioning correctly with consistent heat delivery.
Successfully completed installation of new steam gas boiler system with all required components including backflow preventer, auto feeder, and White-Rodgers digital thermostat. Replaced 14 radiator vents (excluding master bathroom due to cracked radiator), 3 main line steam vents near boiler, radiator valve in small bedroom, and Hartford loop with appropriate 3" black pipe connections.
Performed scheduled heating tune-up on customer's furnace, which had been previously rolled over from January. Inspected gas burner assembly, confirming proper combustion with clean blue flames. Checked all electrical connections and control board functionality to ensure system is operating safely and efficiently.
Responded to service call for clogged sink and second floor bathroom drain. Upon inspection, discovered significant accumulation of hair, soap scum, and organic debris in the drain stopper mechanism. Successfully removed and cleared blockage, restoring proper drainage functionality.
Completed heating tune-up on multiple heat pump systems (furnace, garage, and hot water tank). Performed combustion analysis with readings of CO2 at 5.0%, O2 at 12.1%, and efficiency (ETSC) at 96.4%. Conducted electrical inspection with amperage measurements at 0.32A. All systems functioning properly with high efficiency ratings.
Performed routine maintenance on a 14-year-old gas furnace with MVP motor. Conducted diagnostic testing using UEi measurement tool to verify proper system parameters and pressure readings. System is functioning correctly with all measurements within normal operating range.
Responded to no-heat call for nearly new furnace (under 1 year). Performed diagnostic inspection and discovered system was operating properly with normal blue flame pattern at burner assembly. Verified proper gas valve operation and confirmed all electrical connections were secure. Unit is now functioning correctly with no further action required.
Successfully removed dual steam boilers and installed new Peerless boiler system in basement utility area, complete with new backflow preventer, digital water feeder, low water cut-off, and flue piping. System integration included connection to existing pipe network with proper routing of supply and return lines.
