HVAC & Plumbing Services in Cleveland Heights, OH

Performed comprehensive heating system maintenance on residential boiler unit located in basement mechanical room. Conducted thorough inspection of boiler cabinet, piping configuration, and associated components including expansion tank, copper supply lines, and isolation valves. Utilized combustion analyzer to test system performance, recording flue gas temperature of 351.5°F, oxygen level of 8.92%, carbon monoxide at 0 ppm, and carbon dioxide at 6.82%. All combustion readings within acceptable parameters indicating proper burner operation and heat exchanger efficiency. Visually inspected all pipe connections, fittings, and valves for signs of leaks or corrosion. Verified proper operation of circulator pump and zone valves. Confirmed expansion tank mounting and pre-charge pressure. System operating safely and efficiently with no deficiencies noted.

Completed scheduled preventive maintenance on residential cooling system. Connected refrigerant manifold and diagnostic gauges to outdoor condensing unit to verify system pressures and temperatures, confirming proper refrigerant charge and operational parameters. All readings within manufacturer specifications; system operating normally with no deficiencies noted.

Completed return visit to finalize air conditioning installation by installing supply and return vents following completion of customer's flooring work. Addressed thermostat error message indicating immediate HVAC system attention required. Inspected outdoor condensing unit connections, refrigerant line sets, and service valves to ensure proper installation and system operation. Verified all copper line connections were secure and system pressures were within manufacturer specifications. Cleared system error codes and confirmed thermostat communication with HVAC equipment was functioning correctly. System tested and operating normally upon departure.

Responded to service call for 15-year-old Lennox air conditioning system. Upon arrival, performed visual inspection of outdoor condenser unit and surrounding components. Discovered damaged electrical wiring with exposed conductors near the unit, including compromised insulation jacket revealing internal green and red wires with exposed copper strands. The damaged wire was found lying across deteriorated cardboard material in the gravel base area, presenting a safety hazard and potential cause of system malfunction. Inspected electrical disconnect box and conduit connections mounted on exterior brick wall. Assessed the condition of the cylindrical condenser unit with horizontal louvers and top-mounted fan grille. Documented the compromised wiring condition and deteriorated materials around the unit base that could impact electrical safety and system performance. Addressed the electrical hazard and restored safe operating conditions to the system. Verified proper connections at the di

Responded to service call for leaky sink in older residential property with active Home Care Plan. Upon arrival, inspected plumbing connections and fixtures in utility room area where water heater and associated piping were located. Identified source of leak at sink supply connections, tightened compression fittings, and verified all plumbing connections were secure with no active drips or moisture present upon completion.

Responded to no cooling call for 12-year-old residential air conditioning system affecting entire home. Upon arrival, found outdoor condensing unit not energizing. Performed diagnostic evaluation of electrical components, refrigerant system, and control circuits to identify root cause of system failure and restore cooling operation to the residence.

Responded to no cooling call on 30+ year old system. Found outdoor unit running and thermostat calling for cooling, but indoor unit only humming with little to no airflow. Diagnosed failed blower motor preventing air circulation through the system. Replaced clogged air filters and explained system age and condition to customer. Due to advanced age of equipment and cost of repairs, recommended full system replacement for improved efficiency and reliability.

Conducted on-site estimate for living room cast iron radiator replacement or removal and thermostat upgrade. Assessed existing antique cast iron radiator unit showing age-related corrosion and oxidation, along with current circular wall-mounted thermostat. Discussed heating system options and modern thermostat alternatives with customer to determine preferred solution for improved climate control.

Responded to service call for leaking outdoor spigot that was previously installed two years ago. Upon arrival, inspected the spigot and surrounding area, noting water intrusion affecting nearby electrical box. Assessed the connection points, valve assembly, and mounting hardware to identify source of leak. Documented conditions with photographs showing exposed plumbing infrastructure and mechanical space where spigot line runs through structure. Evaluated potential safety concerns related to water proximity to electrical components and provided recommendations for repair to prevent further damage.

Responded to no-cool call on 2-year-old Bryant air conditioning system. Upon arrival, performed diagnostic inspection of outdoor condensing unit and verified unit was not powering on. Inspected electrical disconnect, conduit, and wiring connections at unit. Documented equipment nameplate data and current system condition with photographs for service records. System evaluated and findings provided to customer for repair authorization.

Responded to complaint of toilets gurgling into business below when flushed, with fixtures eventually losing ability to flush properly. Performed diagnostic inspection of plumbing system, focusing on drain and vent lines serving the affected toilets. Inspected exposed drainage piping in basement utility area, examining PVC drain lines, copper water supply lines, and venting configuration. Identified potential drainage obstruction or venting issue affecting proper waste evacuation from upper-level toilet fixtures. Documented existing plumbing infrastructure conditions with photographs showing pipe routing, support systems, and overall basement utility space configuration for further evaluation and repair recommendations.

Responded to a no heat call and discovered severely corroded metal piping in the mechanical system. Repaired the affected section of piping to restore proper system operation and prevent potential failure. Customer will be remitting payment by mail.

Completed comprehensive AC tune-up and system inspection for first-time service call on cooling system of unknown age. Performed standard maintenance procedures including inspection of electrical components, contactor assembly, and control panel wiring; verified proper operation of all safety devices and electrical connections; cleaned and evaluated system components to ensure optimal performance for the cooling season.

Completed full ductwork replacement in attic including all supply ductwork with 10 supply outlets and return air ductwork to address damaged sections. Replaced refrigerant line insulation that had been compromised by animal damage. Installed new Bryant ductless mini-split heat pump system for kitchen with indoor wall-mounted evaporator unit and outdoor condenser unit wall-mounted adjacent to existing mini-split condenser on exterior brick ledge.

Responded to service call for outdoor condensing unit damaged by falling ice. Upon arrival, found condenser fan blade severely dented and fan motor operating improperly due to impact damage. Inspected top-mounted fan assembly and protective guard for structural integrity. Documented damage to fan blade and assessed unit for additional impact-related issues. Unit requires replacement of damaged condenser fan blade and motor verification to restore proper airflow and system operation.

Responded to service call for non-functioning kitchen radiator that had been previously serviced without resolution. Conducted thorough assessment of radiator system and associated plumbing components. Inspected radiator enclosure, supply and return lines, and control valves. Identified issues with radiator circulation and provided detailed estimate for necessary repairs to restore proper heating function to the affected zone.

Completed preventive maintenance on two 1-year-old air conditioning systems. Performed comprehensive tune-up procedures on both units including inspection of blower wheel assembly, verification of refrigerant pressures using manifold gauges for R-410A systems, cleaning of evaporator coils and condenser fins, and testing of all operational components. Both systems operating within manufacturer specifications upon completion.

Completed comprehensive AC tune-up on six-year-old cooling system for Home Plan member. Performed standard maintenance protocol including inspection of blower wheel assembly, which showed normal wear consistent with unit age. All components tested and operating within manufacturer specifications; system ready for cooling season.

Conducted on-site evaluation for complete HVAC system replacement in residential basement mechanical room. Assessed existing ductwork configuration, heating equipment, and spatial requirements for new installation, documenting current system layout including suspended metal ductwork, PVC piping connections, and equipment positioning. Evaluated exterior access points and clearances for equipment removal and installation, photographed existing conditions to support replacement proposal specifications.

Completed maintenance on two furnaces including comprehensive tune-up procedures. Repaired 2" PVC combustion air piping where hole was improperly drilled, ensuring proper seal and venting integrity. Addressed interior rust spot by sanding and treating affected area to prevent further corrosion and maintain unit longevity.