HVAC & Plumbing Services in Cleveland Heights, OH

Conducted comprehensive assessment of A.O. Smith water heater located in basement utility area. Unit appears functional with proper copper piping connections and gas supply line, though surrounding area shows evidence of minor staining. Performed scheduled tune-up service to ensure optimal operation and efficiency.

Performed scheduled maintenance on steam boiler system. Inspected heat exchanger assembly and found moderate dust accumulation on fins and coils. Cleaned heat transfer surfaces to restore optimal thermal efficiency and ensure proper system operation.

Successfully completed steam boiler replacement, installing a new unit with proper venting system and pipe connections. Verified installation with temperature readings using Klein Tools ET100 Digital Thermometer and confirmed system functionality with temperature at 15 degrees.

Responded to no-heat call for recently installed furnace. Inspected unit and found burners operating properly with normal blue flame pattern. Verified all electrical connections were secure and gas valve functioning correctly. System now heating effectively.

Performed scheduled furnace tune-up service. Verified proper system operation with temperature readings of 72.5°F. Inspected blower wheel assembly which showed minimal dust accumulation requiring no cleaning at this time.

Diagnosed and repaired a running toilet on the 3rd floor. Replaced worn flapper valve and adjusted water level to correct continuous running issue. Also serviced the 3rd floor double sink by replacing defective hot and cold water handles to restore proper functionality.

Serviced 2-year-old Peerless steam radiator system that was experiencing leakage at the condensate return connection. Inspection revealed water damage on wooden flooring around pipe penetrations. Repaired faulty valve fitting and sealed pipe connections to resolve the leak while maintaining proper heating function.

Performed scheduled maintenance tune-up on heating system. Inspected radiator components and found them in normal operating condition with minor dust accumulation. System functioning as expected after service.

Conducted comprehensive inspection of aging steam boiler system showing significant pipe corrosion and wear. Evaluated existing installation in basement mechanical room, noting multiple deteriorated copper pipes, valves and fittings throughout the distribution network. Provided replacement estimate for complete system upgrade to address efficiency concerns and prevent potential failure risks.

Performed diagnostic assessment on 15-year-old steam boiler system that was actively steaming. Inspected insulated piping network and connection points showing signs of wear and moisture damage. Determined thermostat replacement was required after previous unsuccessful attempt by handyman. Successfully installed compatible replacement thermostat and verified proper system operation.

Performed scheduled maintenance service on customer's tankless water heater system. Inspected all plumbing connections, ventilation ducts, and electrical components. Noted some deterioration of wall surfaces around installation area but confirmed all systems functioning properly with no immediate concerns.

Responded to no heat call for existing customer with York furnace. Diagnosed faulty gas valve causing heat failure. Replaced gas valve assembly, reconnected electrical connections and copper gas line, then verified proper system operation and heat production.

Performed emergency service on frozen pipes in unfinished basement area. Completed full drain down of water lines to prevent further freezing and potential pipe damage, as customer had no operational heating system. Previous service technician Paul had identified the issue during an earlier visit.

Completed installation of new Bryant furnace with PVC venting routed through right side of home. Installed new air cleaner to replace outdated 2200 SpaceGard unit, using model 1210 to minimize duct modifications. Added ozone-free air scrubber to improve indoor air quality as requested.

Conducted service call to assess gas line connection to hot water tank. Identified non-compliant flexible gas line currently supplying hot water heater. Recommended replacement with proper hard-piped connection to meet code requirements and ensure safe operation.

Responded to no-heat service call for a 20-year-old furnace system. Upon inspection, discovered deteriorated PVC condensate drainage with visible leakage and wall penetration damage. Recommended complete system replacement due to age and condition of equipment, with attention to proper drainage installation and sealing to prevent future moisture issues.

Responded to service call for non-operational boiler approximately 5-10 years old. Inspection revealed gas valve assembly functioning properly with good flame pattern across burners, though brass gas line shows signs of oxidation. Verified proper gas flow and combustion, restored system to working order.

Responded to service call for recently installed furnace (January) that was not operating. Upon inspection, verified proper ignition with strong blue flame visible in sight glass. Checked gas valve assembly, connections, and wiring - all components now functioning correctly. System operational and heating effectively.

Performed inspection on 10-year-old natural gas boiler as requested by customer prior to extended absence. Examined water level in sight glass, which was found to be full. Checked valve assembly and associated plumbing components, ensuring proper functionality of the system. All components operating within normal parameters; no issues requiring immediate attention were identified.

Diagnosed garage heating system with Johnson Controls A419 temperature controller showing readings of 143-164 degrees. Inspected and adjusted controller settings to restore proper heat output on 9-year-old heating unit. Verified system operation and confirmed proper temperature regulation through the digital controller.