HVAC & Plumbing Services in Cleveland Heights, OH

Performed standard furnace tune-up service with flame inspection showing proper blue flame combustion pattern, indicating efficient gas ignition and complete combustion. System was tested and verified to be operating within manufacturer specifications with no issues detected. Technician parked on street as requested by customer.

Responded to no-heat call for Weil-McLain boiler system. Diagnosed failed ignition control module causing system failure. Replaced control module, tested all safety components, and verified proper operation. System now functioning with normal flame pattern and appropriate temperature rise.

Performed deliming service on 7-year-old tankless water heater to remove mineral buildup and restore optimal performance. Inspected existing plumbing components including valves, copper piping, and connections for proper operation. Scheduled additional maintenance for steam boiler system with technician.

Performed scheduled Heating Tune Up under Home Plan on boiler system. Identified significant corrosion and rust on heat exchanger fins with substantial dust/debris accumulation between fins. Observed deterioration of metal components and compromised insulation/sealant at connection points requiring attention for optimal system performance.

Performed scheduled heating maintenance on two systems per home service plan. Conducted temperature differential testing showing 87.0°F reading, and measured system static pressure at 1.74" WC using digital manometer (HT-1890). All parameters within acceptable ranges for proper operation; systems functioning efficiently for the heating season.

Responded to service call for 3-year-old A.O. Smith ProLine commercial grade water heater not delivering hot water to units #2 and #4. Diagnosed system issues in basement (code 6041) and performed necessary adjustments to restore proper hot water flow to affected units. Verified proper ventilation and expansion tank functionality during service.

Conducted furnace replacement estimate in residential basement. Inspected existing aging unit and associated ductwork connections. Customer is pursuing grant assistance for replacement costs and scheduled follow-up appointment to proceed with installation.

Responded to follow-up request regarding previous furnace tune-up service. Located and sealed an uncapped test hole in ductwork using foil tape, ensuring proper system sealing. No MVP (maintenance value plan) noted for this account.

Performed second opinion evaluation on 30+ year old boiler system after previous repair resulted in leakage. Inspection revealed aging installation with standard expansion tank mounted on brick chimney structure and copper distribution piping. Richmond "INTEGRA" water heater with 8-year warranty also present in utility area, appearing in functional condition with no visible issues. Recommended comprehensive assessment of pressure relief valve and system components to address ongoing leakage concerns.

Performed scheduled furnace tune-up service. Inspected boiler system components including sight glass, valves, and copper supply lines. Verified proper operation of Safgard system and checked all plumbing connections in utility area for leaks. System functioning properly with no issues identified.

Performed scheduled annual maintenance on 21-year-old hot water boiler system. Inspected circulation pump, verified proper electrical connections and pump operation. Examined copper piping system, checked all brass fittings and flanges for leaks, and tested pressure regulator valve functionality. System is operating within normal parameters.

Performed scheduled maintenance service on residential steam boiler system. Inspected all ductwork connections, copper supply lines, and pipe joints for integrity and proper function. Verified system operation and confirmed all components are operating within normal parameters.

Performed scheduled heating system tune-up using UEi C151 Combustion Analyzer to verify proper combustion efficiency and system parameters. Diagnostic testing showed all readings within acceptable ranges, confirming the heating system is operating at optimal performance levels.

Performed faucet replacement in a century-old home with deteriorating plumbing infrastructure. Installed new P-trap assembly with PVC piping and braided supply lines beneath bathroom sink. Identified and documented water damage and corrosion at pipe junctions in basement, particularly where dissimilar metals connect, which may require future attention.

Performed scheduled maintenance on two steam boiler units. Conducted combustion analysis with readings showing CO at 26P, CO2 at 9.1%, excess air at 31.1%, and other parameters within acceptable ranges. Inspected sight glass and surrounding plumbing components, noting some corrosion at connection points that should be monitored but are currently functional.

Performed scheduled maintenance on residential boiler and air handler systems. Inspected heat exchanger components which showed significant corrosion on metal fins and deteriorating insulation between plates. Documented condition of heating elements with visible dust accumulation and oxidation on radiator components that will require attention during next service visit.

Successfully installed a 5-zone ductless mini-split system with strategic placement of indoor units throughout the residence. System includes 12K BTU wall-mounted units in the 3rd floor and kitchen (above door), 9K BTU wall-mounted units in the master and front bedrooms, and a 12K BTU floor console in the office positioned to condition the living room. Condenser was placed at the rear of the property as specified, with all units properly mounted, connected and tested for operation.

Successfully replaced 50-gallon water heater in basement utility room, including installation of an expansion tank. Accessed wall cavity to service plumbing for his and her sink, addressing copper pipe connections at the brass distribution manifold. Completed all necessary connections to existing ductwork and PVC water lines with proper hot/cold designations.

Performed scheduled boiler maintenance service. Inspected copper piping connections and identified significant water damage to structural beam above piping junction. Observed deterioration in ductwork insulation requiring attention during next service interval.

Performed comprehensive furnace tune-up service including inspection of blower wheel assembly. Verified proper fan operation and balance, ensuring optimal airflow for system efficiency. All components were found to be in good working condition with no issues identified.