HVAC & Plumbing Services in University Heights

Completed full HVAC system replacement for main residence, installing two new furnace and heat pump combinations with associated line sets and Arzel zoning system. Replaced existing equipment at pre-existing locations along driveway and back patio areas, with furnace units positioned in basement, maintaining all original thermostat locations for seamless integration with updated zoning controls.

# Tanked Water Heater Flush Service Performed routine maintenance flush on a 3-year-old residential tank-type water heater located in basement utility area. Executed complete drainage procedure to remove sediment buildup and mineral deposits from tank bottom, which helps maintain heating efficiency and extend equipment lifespan. Unit was accessible during scheduled service window and flush was completed without complications. Upon arrival, inspected water heater installation and surrounding plumbing connections. Connected discharge hose to tank drain valve and routed to appropriate drainage area on concrete floor. Opened drain valve and allowed complete tank evacuation, flushing accumulated sediment through discharge line. Monitored water clarity during drainage process to ensure thorough removal of mineral deposits and debris. Once water ran clear, closed drain valve and restored cold water supply to refill tank. Verified proper operation of temperature and pressure relief valve du

Performed annual maintenance on 1-year-old air conditioning system. Connected manifold gauges to outdoor condenser unit and verified system pressures and temperatures were within manufacturer specifications. Completed standard preventative maintenance checklist including visual inspection of equipment, verification of proper refrigerant charge levels, and overall system performance evaluation.

Conducted on-site assessment for complete furnace and air conditioning system replacement. Evaluated existing basement HVAC installation including current furnace unit, air handler, and associated ductwork system. Documented equipment specifications, existing infrastructure conditions, and spatial requirements for new system installation. Photographed current setup showing beige furnace with metallic ductwork, adjacent air handler, copper refrigerant lines, and branch duct configuration. Noted wall conditions and provided comprehensive replacement estimate for new heating and cooling equipment.

Responded to no cooling complaint on 1-year-old system with reports of loud noises from both air conditioning unit and furnace, along with air escaping sounds. Upon arrival, customer had already shut down equipment due to concerns. Performed diagnostic inspection of Bryant furnace and associated A/C system. Identified issues related to abnormal operational sounds requiring further investigation. System components including venting, ductwork, and cabinet panels were examined for potential air leaks or mechanical failures that could cause reported noise disturbances.

Responded to a first-floor bathroom sink drain leak with water intrusion into the basement. Upon inspection, identified a compromised PVC drain pipe connection at or near the wall penetration point, evidenced by active water staining on the bathroom floor at the pipe base and moisture dripping through to the basement ceiling below. Accessed the affected plumbing from the basement crawl space where the drain line was visible against the OSB wall backing. Repaired the leaking PVC connection, verified proper drainage flow, and confirmed cessation of water intrusion to the basement area.

Responded to no heat call following previous day's maintenance visit on one-year-old furnace. Upon arrival, thermostat displayed "call for service" error code. Diagnosed faulty printed circuit board (PCB) causing system lockout. Replaced defective control board, restored power, and verified proper system operation with all safety controls functioning correctly.

Completed routine maintenance tune-up on 8-year-old residential air conditioning system under active maintenance contract. Performed comprehensive inspection of outdoor condensing unit, verified proper refrigerant levels and pressures, checked electrical connections and components, cleaned condenser coils, and confirmed optimal system operation. All components functioning within manufacturer specifications with no issues identified; system ready for cooling season.

Responded to general air conditioning service call and performed routine maintenance on residential AC system. Upon arrival, conducted thorough inspection of outdoor condenser unit, which was found properly mounted on concrete pavers with adequate clearance from structure. Verified refrigerant line sets were secure and properly insulated along exterior wall. Cleaned condenser coils, inspected electrical connections, and confirmed unit operational status. System operating within normal parameters at time of service completion.

Completed annual maintenance on one-year-old gas furnace and air conditioning system in basement utility area. Performed comprehensive inspection of furnace components including blower wheel assembly, verified proper operation of forced-air heating system, checked all ductwork connections and insulation integrity, and inspected gas line connections and electrical components. Conducted preventive maintenance on A/C system per manufacturer specifications, cleaned blower wheel of dust accumulation, verified all safety labels and warning stickers were intact, and confirmed both heating and cooling systems are operating within normal parameters for continued reliable performance.

Responded to water heater failure resulting in significant basement flooding. Upon arrival, found extensive water accumulation on concrete floor with dark staining indicating prolonged moisture exposure. Deployed portable vacuum pump with drainage hoses to extract standing water from affected area. Connected discharge lines to floor drain for proper water removal. Coordinated with HVAC technician scheduled for same-day service to address air conditioning system following water heater assessment. Water heater exhibited signs of tank failure requiring immediate attention to prevent further flooding damage.

Responded to gas line repair request at a 70-year-old residential property. Successfully located and repaired compromised gas line connection within HVAC mechanical housing, replaced worn flexible gas connector, and conducted pressure test to verify system integrity and confirm no leaks present.

Responded to water leak concern at exterior panels suspected to originate from AC condensate drainage system. Upon inspection, discovered significant water damage and deterioration in basement/crawl space area with compromised wall surfaces, peeling paint, and exposed brickwork. Examined PVC drainage pipes, condensate lines, and associated plumbing infrastructure running along walls and overhead. Documented existing conditions showing white stone drainage bed with debris accumulation, multiple pipe runs including insulated refrigerant lines, copper piping, and flexible conduit installations. Assessed integrity of condensate drain system and mounting hardware. Photographed deteriorated wall conditions, pipe routing, and overhead utility infrastructure for documentation purposes.

Responded to service call for garbage disposal leak beneath kitchen sink. Upon inspection, identified small leak at disposal mounting flange connection to sink basin. Tightened mounting bolts and inspected drain connections, including corrugated drain hose and PVC discharge pipe assembly. Verified proper sealing of all connections, tested disposal operation, and confirmed leak was resolved with no further water discharge observed.

Replaced three steam valves servicing the kitchen and bathroom radiators, and installed a new steam vent on the living room radiator. All components were tested and verified for proper operation. System is functioning correctly with no leaks detected.

Completed comprehensive plumbing stack assessment and repair work involving sump pump system and exterior spigot connections over a four-day period with two-person crew. Performed exploratory demolition of interior wall and ceiling sections to access concealed plumbing infrastructure, exposing vertical stack assembly, supply lines, and drainage components. Documented extensive water damage and deterioration to wall framing and drywall materials, indicating previous moisture intrusion requiring remediation prior to system repairs and wall restoration.

Conducted on-site assessment for multi-story residence currently equipped with boiler system and furnace/AC serving main floor only. Evaluated heating and cooling requirements for unserved second and third floor areas, inspecting existing mechanical infrastructure and available installation pathways. Documented current HVAC configuration including exposed ductwork and equipment locations in upper level spaces. Provided professional recommendations comparing heat pump system versus alternative HVAC solutions for upper floor climate control, discussing zoning options to integrate with existing first-floor equipment while maintaining independent temperature control for each level.

Performed comprehensive maintenance on steam boiler system of unknown age. Inspected burner assembly, gas valve components, and combustion chamber, confirming proper flame pattern and operational status. Verified electrical connections, wiring integrity, and low-voltage control circuits secured to vertical piping with appropriate mounting hardware.

Completed furnace replacement with associated water heater installation in basement mechanical room. Reworked drop to 10x24 specifications, removed and reinstalled coil, replaced outdated 1-1/2" gas shut-off valve, and installed new humidifier with 1410 controller and condensate pump. All connections verified operational with proper ductwork modifications.

Performed scheduled heating system maintenance and tune-up on residential furnace. Conducted comprehensive temperature diagnostics using digital thermometer, confirming proper system operation at 71.2°F. Inspected and cleaned internal components including blower motor, circuit board, and ventilation connections to ensure optimal performance for the heating season.