HVAC & Plumbing Services in Cleveland Heights, OH

Completed scheduled heating system maintenance service. Performed combustion analysis on boiler system with readings of CO: 0, CO2: 7.9%, excess air: 50.3%, and system loss: 17.6%. Inspected pressure regulator valve and associated plumbing components for proper operation and signs of wear.

Performed scheduled tune-up on furnace, inspecting blower wheel assembly for proper operation and cleaning as needed. Conducted diagnostic assessment of control board and electrical components, verifying all connections were secure and functioning correctly. System is now operating within manufacturer specifications.

Performed scheduled maintenance on boiler radiator heating system. Inspected burner assembly showing proper flame pattern and checked all copper piping connections and control unit for functionality. System is operating normally with no issues detected.

Performed comprehensive winter maintenance on two 9-year-old furnaces. Inspected flame patterns and electrical connections, confirming proper burner operation with clean blue flames. All components functioning correctly with no issues detected; system is operating within manufacturer specifications.

Responded to customer concern regarding possible carbon monoxide. Performed combustion analysis with digital analyzer, which revealed CO level of 17 ppm, CO2 at 6.7%, and excess air at 76.4% with system efficiency loss of 11.0%. Readings indicate furnace requires adjustment to improve combustion efficiency and reduce carbon monoxide production.

Performed scheduled maintenance tune-up on aging boiler system. Inspected all components including copper and metal piping, valves, and control assembly. Noted significant corrosion and rust on horizontal metal pipe requiring future attention, though system is currently operational. Customer confirmed and was present during service.

Performed scheduled Home Plan Heating Tune Up service. Conducted comprehensive system inspection including blower assembly examination. Utilized Fieldpiece diagnostic tool to measure temperature differential and CO2 levels, confirming proper combustion efficiency and safe operation parameters. All readings within acceptable range.

Performed annual steam boiler maintenance service, including inspection of water level indicators and verification of proper valve positioning. System is operational, but customer will need to re-enroll in the maintenance plan.

Conducted comprehensive evaluation of existing HVAC system for potential replacement. System located in basement utility area shows significant age deterioration with estimated 2/10 remaining service life. Documented current setup including furnace unit, ductwork configuration, and ventilation components to prepare accurate replacement proposal for client Derek.

Completed kitchen stack repair for client Carmen. Work included addressing significant deterioration in the basement plumbing system, replacing compromised PVC piping, and resolving water damage affecting the kitchen sink area with visible countertop staining and drainage issues. Five-hour service completed with assistant.

Performed scheduled heating tune-up on steam boiler #8-12. Inspected burner assembly and confirmed proper flame pattern during operation. Noted corrosion at pipe junction requiring monitoring; all valves and connections remain functional. System operating within normal parameters.

Performed scheduled furnace tune-up on residential heating system. Inspected gas burners and confirmed proper blue flame combustion indicating efficient operation. Examined water heater and associated piping connections, with all components functioning normally.

Performed scheduled boiler tune-up service. Accessed internal components for inspection including control board, wiring connections, and heat exchanger. All systems were found to be in normal working condition with no visible damage or deterioration. Customer opted to renew maintenance agreement.

Performed scheduled maintenance on heating system per homeplan agreement. Inspected blower wheel which showed significant dust and debris accumulation requiring cleaning. Also noted American ProLine commercial grade water heater with some corrosion at copper pipe connections and mineral buildup at joints. Vent pipe appears functional with normal aging signs.

Performed scheduled maintenance on residential furnace system located in utility area. Inspected gas furnace unit with PVC venting system and connected ductwork for proper operation. Verified all components functioning correctly with no issues identified during the service appointment.

Responded to service call for non-functioning 15-year-old Mitsubishi City Multi system. Inspection revealed outdoor unit heavily obstructed by snow accumulation with significant ice formation on connections and piping. System was unable to operate efficiently due to restricted airflow and frozen condensate drainage. Cleared snow/ice buildup, verified electrical connections, and restored proper operation of the unit. Also noted secondary issue with boiler system not adequately heating master suite area.

Responded to no heat call for MVP customer. Inspection revealed signs of rust on motor assembly components and complex wiring issues within the furnace control system. Performed necessary repairs to restore proper heating function.

Performed annual maintenance and tune-up on 2-year-old furnace system. Inspected burner assembly for proper ignition and flame pattern, confirming normal operation with consistent blue flame across all four burners. Examined copper gas line connections and valve assembly, noting no leaks or corrosion issues. System functioning correctly with all components in good working condition.

Responded to no-heat call for boiler of indeterminate age. Performed diagnostic inspection and found system operational with proper gas combustion evident by blue flame pattern across all five burners. Verified normal operation of heating system with no immediate issues requiring repair.

Responded to no-heat service call for boiler system. Upon inspection, discovered significant moisture damage, mold growth, and corrosion around valve assembly. Cleaned affected components and identified water infiltration source. System was operational upon departure with heat restored to residence.