HVAC & Plumbing Services in Cleveland Heights, OH

Responded to shower drain repair call at 80-year-old residential property. Upon investigation, identified water damage and drainage issues requiring access through ceiling below the shower area. Performed ceiling access work to reach plumbing infrastructure, including removal and repair of drywall section. Inspected plumbing lines, ductwork, and surrounding insulation in confined crawlspace area above affected bathroom. Addressed drainage concern and completed ceiling patch repair with drywall compound. Documented condition of mechanical systems and insulation during repair process.

Responded to service call for excessive condensation affecting entire home on 5-year-old Bryant HVAC system, model CAP4860D6BA. Upon inspection, documented system configuration including furnace unit, air handler, and associated PVC venting system in basement mechanical room. Evaluated condensate drainage components and verified proper system operation to identify source of moisture issue throughout residence.

Replaced existing 40-gallon residential water heater with new Bradford White unit. Installation included connecting gas line, water supply lines, and installing ICON System electronic control module with pilot safety features. Verified all connections, tested gas valve operation, and ensured proper venting and combustion safety protocols were met.

Replaced both the three-handle tub and shower valve assembly and the single-handle tub and shower valve with new chrome fixtures. The installation included new escutcheon plates and trim, restoring proper water control and diverter function to the bathtub plumbing system.

Responded to a no cooling call that originated as a routine filter replacement request. Upon arrival, performed diagnostic evaluation of the residential air conditioning system, which included inspection of the outdoor condensing unit located in the side yard and the indoor air handler/furnace system in the basement. Based on system assessment and age considerations, provided comprehensive estimate for complete HVAC system replacement including removal of existing equipment and installation of new heating and cooling components.

Conducted on-site evaluation of existing 1983 gas furnace system and assessed property for complete HVAC system replacement including addition of central air conditioning. Inspected existing furnace unit located in basement utility area, documented current equipment specifications, ductwork configuration, and electrical connections. Evaluated existing duct system capacity and routing to determine compatibility with proposed air conditioning installation. Photographed equipment nameplate data, furnace condition, surrounding workspace clearances, and overhead duct runs to prepare comprehensive replacement estimate for gas furnace and new AC system.

Responded to no-cooling call for 15-year-old Rheem rooftop air conditioning unit. Upon arrival, performed system diagnostics and determined the unit had reached end of service life with compressor failure and refrigerant leak. Documented equipment nameplate information and overall system condition. Advised customer that due to the age of the unit and extent of repairs needed, replacement would be more cost-effective than repair. Customer declined service at this time.

Responded to emergency call for failed 24-year-old A.O. Smith ProMax water heater that was actively leaking and had flooded the basement. Upon arrival, assessed the extent of water damage and confirmed the unit had reached end of service life with catastrophic tank failure. Shut off water supply and drained remaining water from the failed unit. Disconnected all copper supply and discharge piping, removed old water heater from basement utility room, and disposed of failed equipment. Installed new replacement tanked water heater with proper connections to existing copper plumbing infrastructure, including hot and cold water lines and temperature/pressure relief valve discharge piping. Verified all connections for proper sealing, restored water supply, filled tank, and tested unit operation to ensure proper heating function and no leaks. System returned to full operational status with no further water intrusion.

Performed comprehensive preventive maintenance on 9-year-old residential air conditioning system. Utilized Fieldpiece diagnostic manifold gauge to measure and verify refrigerant pressures and system performance parameters. Inspected condenser unit components including fan assembly and blower wheel, confirming proper operation and adequate airflow. All system readings were within manufacturer specifications, and unit is operating efficiently for continued cooling season performance.

Completed routine maintenance and tune-up on a five-year-old Goodman heating and cooling system. Performed standard inspection of furnace unit, blower motor assembly, ductwork connections, and Aprilaire humidifier. Observed moderate rust and corrosion on internal metal components and blower housing, typical for unit age and operating environment. Verified all electrical connections, tested blower motor operation, and confirmed proper airflow through flexible and rigid duct systems. Both heating and cooling systems operating within normal parameters with no immediate service needs identified.

Completed annual cooling maintenance tune-up on two residential air conditioning units. Inspected Lennox outdoor condenser unit, verified proper operation of all components, and documented drainage system with cleanout access point in attic space. All systems tested and operating within normal parameters.

Completed scheduled cooling system tune-up and preventive maintenance on residential air conditioning unit. Performed comprehensive electrical diagnostics using digital multimeter to verify proper voltage and amperage readings at compressor and fan motor circuits. Inspected condenser coil fins, verified refrigerant levels, tested all electrical connections, and confirmed system is operating within manufacturer specifications for optimal cooling performance.

Replaced and rerouted PVC drainage piping in attic crawl space, installing new vertical and horizontal runs with proper fittings and transitions to black ABS connections. Verified proper drainage flow and completed all-day plumbing repair to restore full system functionality to residential bathroom toilet fixture.

Responded to service call for 20-year-old heating system located in basement. Conducted thorough assessment of existing HVAC equipment, including outdoor condensing unit and indoor components. Documented current system condition through photographic records showing outdoor unit placement, electrical connections, and installation setup. Prepared comprehensive replacement estimate for complete system upgrade, presenting options for modern high-efficiency heating equipment to replace aging unit that has reached end of serviceable life expectancy.

Responded to service call for air conditioning unit that had frozen up and subsequently thawed. Upon arrival, confirmed unit was no longer frozen as reported. Connected Yellow Jacket manifold gauge set to measure system pressures and diagnose refrigerant levels. Testing revealed low refrigerant charge in the system. Performed complete system recharge with appropriate refrigerant type per manufacturer specifications. Verified proper pressures on both high and low side using calibrated gauges. Monitored system operation to ensure proper cycling and cooling performance after recharge was completed.

# HVAC Maintenance - Cooling System Service Performed comprehensive AC tune-up on 6-year-old R-410A cooling system currently operating within normal parameters. Conducted complete system diagnostics using refrigerant manifold gauges, measuring superheat, subcooling, and operating pressures across both low and high sides to verify proper refrigerant charge and system performance. Completed standard preventive maintenance protocol including visual inspection of outdoor condensing unit, verification of unit data plate specifications, and assessment of electrical connections. Tested system operation under load conditions with digital diagnostic equipment confirming proper temperature differentials and airflow characteristics. Evaluated home comfort concerns regarding insufficient cooling capacity to upstairs bedrooms. Discussed potential solutions with property owner including zoning system options, ductwork modifications for improved airflow distribution, and supplemental cooling equip

Completed comprehensive heat pump air conditioning tune-up on outdoor unit. Performed standard maintenance protocol including temperature differential measurements using calibrated digital instrumentation, recording 83.8°F reading during system evaluation. Inspected blower motor assembly, electrical connections, and refrigerant line set. All colored wiring connections verified secure with proper terminations. Unit operational and cooling effectively upon completion, though concrete pad shows age-related deterioration and rust staining from weather exposure that may require future attention for equipment longevity.

Performed routine preventive maintenance on a 4-year-old residential air conditioning system with no reported issues. Conducted comprehensive tune-up including refrigerant pressure and temperature diagnostics using digital manifold gauges, which confirmed system operating within manufacturer specifications at 115.3 psig suction and 347.2 psig discharge with corresponding temperatures of 186°F and 119°F. Inspected condenser coil fins, verified proper airflow, and completed all standard maintenance procedures to ensure optimal system performance for the cooling season.

Responded to service call for non-functional one-year-old LG Smart Inverter mini split system displaying persistent error code following recent service. Diagnosed error code on indoor floor-mounted unit and outdoor condenser, performed system reset and troubleshooting procedures, cleared fault code, and restored full cooling operation to the system.

Responded to water leak emergency with visible ceiling and wall damage in room below bathroom. Upon inspection, identified active water intrusion causing significant discoloration, staining, and paint deterioration on ceiling and upper wall surfaces near ventilation grate. Traced source of leak to bathroom directly above affected area. Documented extensive water damage including ceiling sagging, wall staining with brownish discoloration, paint peeling, and exposed underlayer in multiple locations. Photographed damage to ceiling, walls, and bathroom fixtures for assessment and insurance documentation purposes.