HVAC & Plumbing Services in Cleveland Heights, OH

Responded to service call for plumbing modifications and water heater assessment. Removed unnecessary traps and piping from first floor as requested. Capped affected drain lines in basement to code specifications. Inspected existing 6-year-old tanked water heater and identified improper flue pitch creating potential backdraft hazard. Documented equipment condition and venting concerns with photographs. Discussed safety implications of improperly pitched flue with property owner and provided recommendations for water heater replacement to ensure proper venting and code compliance.

Completed preventive maintenance inspection on two cooling systems. Performed visual inspection of HVAC unit interior components including cabinet housing, flexible conduit connections, and galvanized ductwork. All components found to be in proper working condition with no immediate service requirements noted.

Responded to recurring cooling maintenance call for 2-year-old Bryant air conditioning system. Upon arrival, determined ambient temperatures were too low to properly assess system performance and refrigerant pressures according to manufacturer specifications. Rescheduled return visit for the following morning during optimal testing conditions between 8 AM and 12 PM when outdoor temperatures would be sufficient for accurate diagnostics and system evaluation.

Responded to commercial steam gas boiler service call regarding Ecobee thermostat reporting 8-degree temperature loss and sensor placement inquiry. Upon arrival, observed significant moisture issues in mechanical room including wet floor staining, wall deterioration with mold growth, and evidence of ongoing water infiltration around boiler equipment and Amtrol expansion tank. Documented conditions with photos showing moisture damage to concrete floor and walls, recommended evaluation of sensor locations for optimal system performance, and advised addressing moisture control issues to prevent further equipment deterioration and ensure proper boiler operation.

Performed comprehensive maintenance on 12-year-old gas furnace system. Conducted system diagnostics including gas pressure verification at 3.5" W.C. and temperature differential testing showing 14°F split. Inspected all mechanical and electrical components, cleaned burner assembly, checked heat exchanger for cracks, verified proper airflow, tested safety controls, and confirmed system operating within manufacturer specifications.

Responded to warranty call for brown water dripping from newly installed plumbing in toddler's bathroom from previous incomplete stacked job. Inspected attic space above bathroom and documented HVAC ductwork, insulation, and plumbing connections. Identified roof leak as source of water intrusion affecting new pipe installation. Photographed affected areas showing flexible aluminum ductwork, PVC pipe connections, exposed framing, and pink fiberglass insulation with visible moisture damage and debris accumulation. Plastic vapor barrier requires re-securing upon completion of repairs.

Performed comprehensive routine maintenance on residential gas furnace system. Inspected heat exchanger and burner assembly, confirmed proper ignition and flame characteristics with blue and orange flame pattern indicating efficient combustion. Verified all mechanical components operational, cleaned burner assembly, checked gas connections and exhaust venting for proper operation and safety compliance.

Completed stack repair in residential property. Protected surrounding areas with plastic sheeting and painter's tape to prevent contamination during work. Accessed and repaired plumbing stack system in confined utility space with exposed insulation. Applied spray foam insulation to seal penetrations and gaps around stack penetrations where walls meet. No replacement parts required for this repair. Collected deposit prior to commencing work and photographed completed installation for documentation purposes.

Responded to kitchen sink backup caused by garbage disposal and dishwasher drainage issues. Upon inspection, found improper drainage configuration under kitchen sink with garbage disposal unit connected to dishwasher drain line and P-trap assembly. Cleared blockage in disposal unit and verified proper water flow through drain system. Tested garbage disposal operation and dishwasher drainage cycle to confirm backup was resolved and all fixtures draining properly without further issues.

Completed routine tune-up maintenance on two-year-old heating unit that was originally installed by our company. Performed standard inspection and maintenance procedures on the wall-mounted boiler system, including checking all plumbing connections, copper piping, brass manifolds, valves, expansion tank, and PVC venting. System found to be operating properly with no issues identified or repairs needed.

Completed comprehensive tune-up on 4-year-old furnace system operating within normal parameters. Performed standard maintenance protocol including inspection of ductwork, return air grille, and ventilation components. All equipment found to be functioning properly with normal operational dust accumulation; system confirmed ready for continued service.

Responded to service call regarding non-functional humidifier and concerns about water heater installation water line. Upon inspection, confirmed that the humidifier issue was unrelated to the recent water heater installation completed earlier in the week. Examined plumbing connections, copper piping, and water supply lines in utility area. Assessed electrical components and mounting hardware associated with HVAC system. Advised customer that humidifier malfunction required separate evaluation and was not connected to water heater installation work.

Completed comprehensive heating system tune-up and maintenance service, including thorough inspection of blower assembly and replacement of two air filters. System tested and verified operational upon completion.

Conducted on-site assessment for installation of 18,000 BTU mini split system with outdoor unit placement in attic area. Evaluated existing electrical panel capacity and circuit availability to support new HVAC equipment, photographed current breaker configuration showing adequate space for dedicated circuit installation. Inspected interior installation location in rustic finished room, confirmed wall structure and mounting surface suitable for indoor air handler unit, and documented site conditions for equipment placement and line set routing.

Responded to no heat call and performed comprehensive assessment of existing HVAC system in basement mechanical room. Evaluated aging Trane furnace unit showing signs of wear and operational deficiency, along with associated ductwork, water heater, and plumbing connections. Documented equipment condition through detailed photography, noting furnace specifications, ductwork configuration, and overall system layout. Provided estimate for complete furnace replacement to restore heating functionality to the residence.

Performed comprehensive annual maintenance on a 4-year-old residential air conditioning system. Completed full AC tune-up including inspection of outdoor condenser unit, verified proper operation of compressor and condenser fan motor, checked refrigerant levels and pressures, cleaned condenser coils, inspected electrical connections and disconnect box, examined refrigerant line insulation and mounting brackets, and tested overall system performance. All components found to be operating within normal parameters with no deficiencies noted.

Performed comprehensive cooling system tune-up on R-410A air conditioning unit, model ECTP36CM-1. Utilized digital manifold gauges to measure and verify system pressures at 448 psi high side and 229.9 psi low side, with superheat reading of 67.1°F, confirming proper refrigerant charge and system operation. Inspected evaporator coil assembly, verified equipment specifications, and documented system performance for maintenance records. Collected information for home maintenance plan enrollment.

Responded to clogged kitchen sink in 125-year-old home where homeowner was concerned about potential garbage disposal replacement. Upon inspection, found existing black garbage disposal unit with connected dishwasher drain line and standard P-trap configuration beneath single-basin stainless steel sink. Assessed disposal functionality, cleared blockage from drain system, and verified proper drainage flow. Determined existing disposal unit was operational and did not require replacement at this time.

# HVAC Maintenance - Heating System Service Completed comprehensive heating tune-up and preventive maintenance on a 3-year-old residential furnace system as part of scheduled recurring service plan. Performed standard inspection protocol including burner assembly examination, heat exchanger evaluation, blower motor assessment, and safety control verification to ensure optimal system performance and efficiency for the upcoming heating season.

Completed comprehensive annual maintenance inspection on 5-year-old air conditioning system under active service contract. Performed complete AC tune-up including refrigerant pressure and temperature diagnostics using calibrated digital manifold gauge set, verified system operating parameters were within manufacturer specifications, and documented all readings for service records.