HVAC & Plumbing Services in Cleveland Heights, OH

Performed comprehensive tune-up on 15-year-old boiler system, which was operating properly at time of service. Inspected gas burner assembly and combustion chamber, confirming proper flame characteristics with blue combustion pattern and adequate gas distribution through burner ports. Examined heat exchanger coils, noting dust and debris accumulation on spiral fin surfaces; cleaned heat exchanger sections to restore optimal heat transfer efficiency. Verified combustion chamber integrity, including insulation condition and panel seating. Additionally inspected radiant heating system in garage as requested, confirming proper operation of radiant heat components and distribution lines.

Responded to service call for inconsistent heating in nursery room of residence with 16-year-old furnace system. Inspected traditional radiator heating units throughout home, including nursery radiator and connecting piping. Verified proper heat distribution, checked radiator valve operation, and confirmed system functionality. All radiators found operating within normal parameters with adequate heat output to occupied spaces.

Completed comprehensive cooling system maintenance on 8-year-old residential air conditioning unit as part of scheduled home plan tune-up service. Performed full system inspection, verified refrigerant charge (Puron R-410A), tested electrical components, cleaned condenser coils, checked airflow at air handler, and confirmed all AHRI certified specifications were within manufacturer parameters. All equipment operating efficiently with no deficiencies noted; system ready for cooling season.

Performed routine maintenance flush on 16-year-old Bradford White tanked water heater in basement utility area. Drained sediment buildup from tank, inspected all plumbing connections including copper supply lines and discharge piping, and verified proper operation of temperature and pressure relief valve. Completed comprehensive plumbing inspection of associated water heating system infrastructure and confirmed all components functioning within normal parameters.

Responded to service call for heating system malfunction. Replaced defective gas control valve under warranty, restoring proper combustion and flame operation. Unit tested and verified operational with normal flame pattern visible through inspection window.

Responded to no hot water complaint at residential property. Upon arrival, inspected Rheem Performance Platinum natural gas water heater and associated plumbing connections. Verified unit status, checked gas supply, pilot light operation, and thermocouple function. Assessed copper supply lines, brass fittings, expansion tank, and venting system for proper operation. Restored hot water service to the residence.

Conducted HVAC replacement estimate for residential forced-air heating and cooling system. Evaluated existing 1993 air conditioning unit along with basement-installed furnace, ductwork configuration, and associated mechanical systems to provide comprehensive replacement recommendations.

Replaced 30 feet of deteriorated galvanized water line with new copper piping in basement area. The installation included proper fitting connections and routing along existing utility pathways to restore water supply system integrity and prevent further leakage.

Performed comprehensive cooling system maintenance on a 7-year-old air conditioning unit as part of scheduled preventive maintenance program. Connected digital manifold gauges to measure system pressures and temperatures, verified R410A refrigerant charge levels, and conducted diagnostic testing of the condenser unit to ensure optimal performance and efficiency.

Completed scheduled maintenance on 16-year-old boiler system. Inspection revealed significant frost and ice buildup on evaporator coil assembly, indicating potential airflow restriction or refrigerant issues that were addressed during the maintenance visit.

Responded to plumbing service call at century-old residential property for pipe repair assessment. Upon arrival, inspected exposed copper plumbing infrastructure in basement/utility area with accessible ceiling joists and insulation. Evaluated aging copper pipe system showing natural oxidation and patina consistent with older installation. Verified all shut-off valves, including yellow-handled ball valve and black wheel-style valve, were operational and properly functioning. Confirmed water supply remained active with no active leaks or water damage present at time of inspection. Documented existing plumbing configuration including multiple pipe joints, elbows, brass fittings, and connection points throughout the assembly. Assessed overall system integrity and identified areas requiring monitoring due to age-related wear on copper piping.

Completed full Bryant air conditioning system installation including outdoor condensing unit, indoor evaporator coil, thermostat, and refrigerant line set. System was charged with refrigerant, pressures verified and documented within manufacturer specifications, and all components tested for proper operation. Installation included integration with existing furnace system, proper insulation of refrigerant lines, and final system startup with performance verification.

Completed comprehensive plumbing assessment of basement utility area, documenting existing plumbing infrastructure including PVC supply and drain lines, pipe routing through floor joists, and overall system condition. Photographed all accessible plumbing components, pipe connections, and support installations to provide customer with detailed visual documentation of current plumbing configuration for future reference and maintenance planning.

Responded to service call for aging A/C system experiencing electrical issues causing dimming lights and intermittent blower operation. Upon inspection, diagnosed faulty capacitor as primary cause of voltage drop and system instability. Replaced defective dual-run capacitor with properly rated unit, verified all electrical connections at outdoor unit, and tested system operation under load. Unit now cycles properly without voltage fluctuations, and blower motor operates consistently throughout cooling cycle.

Performed comprehensive boiler tune-up and system evaluation. Conducted combustion analysis using digital analyzer, measuring oxygen levels, carbon monoxide, carbon dioxide, and flue gas temperatures to verify safe and efficient operation. All combustion readings confirmed within acceptable parameters with CO at 0 ppm, CO2 at 0.00%, and flue temperature at 123.1°F, indicating proper burner performance and complete combustion.

Responded to service request for gas line capping in century-old residential property. Successfully located and assessed the existing gas line, which required permanent capping to ensure safety and code compliance. Utilized appropriate pipe wrenches and hand tools to properly install a threaded gas line cap, securing the line to prevent any potential gas leaks. Completed installation per industry standards and verified seal integrity. Documented work with photographs showing tools used and the installed cap fitting.

Performed descaling maintenance service on a Rinnai tankless natural gas water heater to remove mineral buildup and restore optimal efficiency. Isolated the unit using shut-off valves, connected descaling pump with hoses and buckets containing descaling solution, circulated the solution through the heat exchanger to dissolve scale deposits, flushed the system thoroughly, and verified proper operation upon completion.

Completed annual cooling system tune-up and inspection on 10-year-old residential air conditioning unit. Performed comprehensive maintenance including condenser coil cleaning, verified proper airflow through evaporator blower assembly, checked refrigerant levels, inspected electrical connections, and tested system operation. Unit found to be functioning within normal parameters with no deficiencies noted at time of service.

Responded to emergency plumbing repair at vacant property with freeze-damaged water lines. Cut out and replaced multiple burst ProPress fittings and split copper waterlines in wall and ceiling cavities. Opened drywall in entryway wall and ceiling to access damaged sections of plumbing system. Replaced main water shut-off valve during repair process. Pressurized system and conducted comprehensive leak testing throughout the home to verify integrity of all repairs and identify any additional compromised sections. System drained upon completion to prevent further freeze damage. Property requires additional drywall and ceiling repairs by qualified contractor to close opened access areas.

Completed full HVAC system replacement including outdoor condensing unit and indoor evaporator coil. Existing refrigerant line set was pressure tested, inspected for integrity, and reused to minimize installation time and cost. Verified proper insulation on suction line and secured copper refrigerant lines according to manufacturer specifications. Connected new equipment to existing thermostat and confirmed proper communication between components. Installed condensate drainage system with PVC piping routed to appropriate discharge location. Performed system startup, checked refrigerant charge, verified airflow across coil, and tested all operational modes to ensure proper cooling performance and efficiency.