HVAC & Plumbing Services in University Heights

Conducted site assessment for removal of older in-wall natural gas heating unit that had become compromised by a deceased animal inside the system. Documented existing installation conditions including exterior wall-mounted access panel showing signs of weathering and corrosion, and provided estimate for complete unit removal and proper disposal.

Performed comprehensive AC tune-up on 4-year-old Goodman air conditioning system with no reported operational issues. Completed standard preventative maintenance procedures including inspection of outdoor condenser unit, indoor air handler components, refrigerant lines, electrical connections, and condensate drainage system. All components found operating within normal parameters with system maintaining proper cooling function.

Responded to service call for 22-year-old air conditioning system blowing air but not cooling and failing to reach thermostat setpoint. Upon arrival, utilized Testo 550 digital manifold gauge to measure system pressures and temperatures on R410A refrigerant system, revealing abnormal operating parameters. Performed diagnostic evaluation of outdoor condensing unit to identify cause of cooling failure.

Responded to emergency no-cooling call and performed comprehensive system evaluation of existing York furnace and HVAC equipment in residential basement mechanical room. After assessment, provided detailed estimate for complete HVAC system replacement to restore cooling functionality and improve overall system efficiency and reliability.

Responded to no cooling complaint on 14-year-old air conditioning system. Upon inspection, found failed dual run capacitor preventing outdoor condenser unit from operating. Replaced defective capacitor with proper OEM-spec replacement, verified all electrical connections, and tested system operation. Unit restored to normal cooling function with compressor and condenser fan motor running within manufacturer specifications.

Performed routine heating system maintenance and tune-up on a 6-year-old furnace unit, model EHD4X36L17A1. Conducted comprehensive system diagnostics using refrigerant manifold and micron gauge, verifying pressures and refrigerant levels within manufacturer specifications for R-410A system. Inspected all safety labels, operational specifications, and system components to ensure proper functioning and compliance with operational standards.

Responded to callback for 50-gallon Bradford White natural gas water heater experiencing recurring temperature and pressure relief valve leak, just two days after previous repair. Upon inspection, found T&P valve leaking again and water temperature continuing to rise despite thermostat adjustment to lowest setting, indicating potential thermostat failure and safety concern. Due to recurring failure, age of unit, and safety risk from uncontrolled temperature rise, recommended and customer approved complete water heater replacement to ensure safe and reliable operation.

Conducted comprehensive on-site assessment of existing HVAC system for replacement estimate. Evaluated 25+ year-old air conditioning unit currently non-operational and approximately 12-year-old furnace installation in basement mechanical room. Documented existing equipment configuration including beige furnace unit with white PVC venting system, copper plumbing connections with shut-off valves, metal ductwork, and associated mechanical components. Photographed current system layout, piping arrangements, and equipment placement on concrete floor against cinder block walls to facilitate accurate replacement planning and equipment sizing recommendations.

Responded to service call for ice buildup on refrigerant piping at a three-year-old Carrier air conditioning system. Connected Fieldpiece 3-port manifold gauges to measure system pressures and temperatures to diagnose the freezing condition. Based on gauge readings and visual inspection of the evaporator coil and suction line, determined the ice accumulation was likely caused by restricted airflow or low refrigerant charge, both common causes of evaporator coil freezing. Documented system conditions with photographs of the indoor air handler unit showing manufacturer specifications and diagnostic equipment in place during testing. System evaluation completed and findings communicated to address the freezing issue.

Completed comprehensive cooling maintenance on a 9-year-old residential AC unit that had not been serviced since its 2019 installation. Performed full system tune-up including coil cleaning, refrigerant level verification, electrical connection inspection, and condensate drain clearing to restore optimal performance. Unit is now operating efficiently with all components functioning within manufacturer specifications.

Performed complete tune-up and system diagnostics on 14-year-old residential air conditioning unit during scheduled 12-4 service window. Utilized digital manifold gauge set to measure operating pressures and temperatures, verified refrigerant charge levels, and inspected condenser coil fins for proper airflow. All system parameters were within normal operating range, and unit nameplate specifications were documented for service records.

Responded to emergency service call for leaking water heater with malfunctioning temperature and pressure relief (TPR) valve. Upon arrival, found TPR valve releasing water in excessive amounts when operated, prompting customer to shut off main water supply to prevent further discharge. Inspected Defender Safety System water heater unit and confirmed TPR valve failure requiring immediate attention to restore safe operation and prevent potential water damage.

Completed full HVAC system replacement including furnace, evaporator coil, air conditioning unit, and thermostat. Upgraded existing bypass humidifier to power humidifier for improved humidity control and system efficiency. System was evacuated to proper micron level as verified by digital vacuum gauge, ensuring complete moisture removal from refrigerant lines prior to charging. All refrigerant lines, condensate drainage, and ductwork connections were properly installed and sealed. New equipment was tested and confirmed operational with all safety controls functioning correctly.

Completed annual cooling maintenance on a 15-year-old air conditioning system. Performed comprehensive tune-up including inspection of evaporator coil which showed moderate dust and dirt accumulation on fins with some water staining present. Conducted temperature diagnostics on outdoor condensing unit, recording operating temperature of 124°F during testing. Cleaned condenser coils, checked refrigerant levels, inspected electrical connections, and verified proper system operation. All components functioning within normal parameters upon completion of service.

# HVAC Install - Complete System Completed full HVAC system installation including outdoor condensing unit and indoor air handler components. Installed new refrigerant line set with proper insulation and secure connections using brass service valves. Routed condensate drain line using white corrugated tubing with proper pitch for drainage. Positioned outdoor unit on prepared ground surface with appropriate clearances from surrounding vegetation. Established all electrical connections to control board including low-voltage wiring for thermostat communication. Performed system startup and pressure testing using differential manometer to verify proper static pressure readings across the system, measuring 3.58 inches of water column. All refrigerant connections tested and verified leak-free, with system charged to manufacturer specifications and ready for operation.

Performed comprehensive air conditioning tune-up on 3-year-old Bryant system. System evaluated and found operating properly with no issues reported by customer. Conducted standard maintenance procedures including refrigerant pressure checks using digital manifold gauges, which confirmed proper system charge and operating parameters within manufacturer specifications. Inspected outdoor condenser unit, verified clean coil fins and proper airflow. Examined indoor furnace and air handler components in basement mechanical room, checked all electrical connections, and verified proper drainage through PVC condensate lines. All system components functioning as designed with no repairs required.

Performed routine maintenance on a 15-year-old Goodman air conditioning system, model SCU10E30A-4. Completed comprehensive tune-up including air filter replacement, visual inspection of outdoor condenser unit, and verification of proper system operation with no issues identified.

Conducted HVAC replacement estimate for a 30-year-old system. Evaluated existing Rheem unit located in basement utility area, noting moisture staining on concrete floor and condensate drainage conditions. Assessed exterior condenser location with overgrown vegetation requiring clearance for proper airflow and service access.

Conducted comprehensive on-site evaluation for complete HVAC system replacement including both furnace and air conditioning units. Assessed existing equipment in basement mechanical room, documented current system configuration including water heater proximity, ductwork layout, and available clearances for new equipment installation. Photographed existing furnace unit with connected supply and return ductwork, insulated piping, and electrical connections to provide accurate specifications for replacement system sizing and compatibility requirements.

Replaced 50-gallon residential water heater in basement utility room. Disconnected existing unit, installed new water heater with proper copper piping connections, ensuring all supply and discharge lines were securely fitted and code-compliant. Verified proper operation of expansion tank and completed system testing to confirm hot water delivery throughout the residence.