With five generations of knowledge, Verne & Ellsworth Hann has provided our clients in Shaker Heights with outstanding customer service. When you need trained HVAC technicians or certified plumbing services, you can count on Verne & Ellsworth.
Northeast Ohio’s Heating, Air Conditioning, Boilers, Plumbing experts. If you’re having problems with your HVAC or plumbing, contact us today!
Reliable Heating Replacement & Repair
The average winter temperature for Shaker Heights is 36 degrees. When the weather is that cold, you need to know you can count on your heating unit to do its job. Inevitably, heating units will break down, but you can always count on Verne & Ellsworth for reliable heating services. We can install, replace, repair, and maintain your home’s heating unit.Â
Our qualified heating technicians have decades of experience with:
- Gas and electric furnaces: These are tried and tested methods for keeping your home warm. With reliable fuel sources and the ability to share your AC’s existing ductwork, a furnace is a fantastic option for heating your home.
- Boilers: Boilers heat the home by boiling water, piped throughout to radiate heat into the air. This centuries-old device uses one of the most reliable methods around.
- Heat pumps: Heat pumps are a modern way to heat your home. They work without external heat sources, such as furnaces and boilers, and can pull heat from the air, ground, or a nearby water source.Â
Comprehensive Cooling & AC Services
When the humidity spikes and the temperature approaches 90 degrees, it’s no time for your AC to stop. No matter the issue, you can count on Verne & Ellsworth for trustworthy cooling services. Our certified AC technicians can install, replace, repair, and maintain your home’s AC unit.
We have decades of knowledge in:
- Ductless mini-splits: A ductless mini-split gives you complete control over your home’s temperature without the cumbersome ductwork of traditional units. A ductless mini-split cools your home through an individual unit mounted to the wall in each room.
- High-velocity ACs: High-velocity AC units are a perfect option for historic homes in the Shaker Heights area. Instead of ductwork, they use small, flexible tubing to pipe air throughout your home.
Air Quality & Ductwork Services in Shaker Heights
The air quality in your home has a significant impact on your health and well-being. This is why Verne & Ellsworth is proud to work with units such as:
- Air scrubbers and cleaners: These units keep the air free of germs and allergens, keeping your lungs happy and healthy.
- Carbon monoxide detection: These can be life-saving devices for those using gas or oil furnaces.
- Whole-house humidifiers: Dry air pulls moisture from anywhere it can. Protect your home, furniture, and skin with a whole-house humidifier.
- Whole-house dehumidifiers: Too much moisture in the air can lead to mildew and mold issues. A dehumidifier is an easy way to prevent this.Â
Top-Rated Plumbing Services
Malfunctioning plumbing is a fast way to ruin your day. You can count on Verne & Ellsworth when you need qualified plumbing services. We’ll keep your plumbing running smoothly with such services as:
- Water heaters: We can install or repair your traditional or tankless water heaters.
- Water lines: We can install or repair your water lines to keep your potable water flowing.Â
- Gas lines: We can pipe, repair, and test your gas lines to ensure your home’s safety.
- Drain snaking: We’ll keep your home draining smoothly, removing any pesky clogs you may face.
Schedule With Verne & Ellsworth Hann in Shaker Heights
One of the oldest family-run businesses in the area, Verne & Ellsworth has won the Angi Super Service Award and the Best of the Heights Award. We are committed to outstanding customer service, professionalism, and integrity. When our licensed and insured technicians set foot on your property, you can rest assured the job will be done right.
Contact our team today to request a free estimate or to schedule services in Shaker Heights.
Verne and Ellsworth Hann has completed 20 jobs in Shaker Heights, OH between February 2026 and March 2026. The most recent job was on March 2, 2026. Verne and Ellsworth Hann has completed 886 jobs in Shaker Heights, OH in the last 12 months.Recent Jobs and Reviews in Shaker Heights, OH
Shaker Heights, OH at a glance
Job Locations and Reviews
Performed scheduled maintenance on 8-year-old MVP steam boiler system. Inspected copper piping and T-junction valve assembly for proper operation. Evaluated main boiler unit, checked control panels, and examined all connection points; placed collection buckets to capture minor condensation during service.
Performed scheduled maintenance on tankless water heater, including complete descaling procedure as per manufacturer recommendations. Installed temporary bypass system using metal-braided hoses and collection bucket for proper circulation of descaling solution. Also completed routine maintenance on boiler system, checking all control valves and confirming proper operation of both systems.
Performed scheduled maintenance on residential boiler system. Inspected burner assembly and found significant rust/oxidation on heat exchanger fins. Completed standard cleaning and operational testing to ensure proper functionality despite visible wear on components.
Responded to service call for 3.5-year-old natural gas steam boiler system where the pressure reducing valve was actively leaking, requiring shutdown which affected heating to half of the residence. Inspected the brass pressure regulator valve assembly and surrounding copper piping configuration. Replaced faulty reducing valve, restoring proper system pressure and full heating functionality throughout the home.
Successfully rerouted steam radiator return line adjacent to basement window, ensuring proper system flow while maintaining clearance from the window opening. Installation included proper insulation of all exposed ducts and securing connections to existing HVAC infrastructure.
Conducted whole home plumbing inspection with focus on water heater system. Examined water heater unit, including connections to copper piping, ventilation duct, and safety components. Unit appears to be properly installed on concrete pad with appropriate clearances and venting.
Performed scheduled maintenance on natural gas heating system. Inspected burner assembly which showed proper blue flame operation but observed significant rust and corrosion on heat exchanger components. System is operational but showing signs of age-related deterioration that should be monitored in future service visits.
Performed tune-up maintenance service on two heating systems: a furnace with Silent Pilot control board and a boiler system with associated plumbing. Visual inspection of both units confirmed proper installation of components including wiring, gas valve assembly, heat exchanger, pressure gauge, and various piping connections.
Completed initial phase of multi-stage steam radiator relocation project, removing and preparing to reinstall two radiators from 2nd floor bedroom and 3rd floor bathroom to adjacent rooms. Accessed and evaluated concealed steam line in wall between dining room and kitchen, requiring further assessment once demolition is complete. Relocated cooling thermostat in dining room to adjacent wall and documented exposed subfloor structure and ceiling cavity to prepare for subsequent pipe modifications.
Responded to no-heat service call for 5-year-old thermostat issue. Upon inspection, discovered significant sediment buildup in the boiler system with visible rust accumulation in the sight glass. Found active leak requiring containment with collection bucket; performed system flush and replaced corroded pipe section to restore proper heating function.
Performed a flush service on a 7-year-old 75-gallon Bradford White water heater due to customer's report of rapidly diminishing hot water supply. Completed full system flush to remove sediment buildup and inspected all connections and valves for proper operation. Service addressed the performance issue while maintaining the existing plumbing infrastructure in the basement utility area.
Performed annual maintenance on boiler and furnace system. Conducted combustion analysis using UEi analyzer, confirming proper O2 (12.4%), CO2 (4.9%), and CO (20ppm) levels. Inspected heat exchanger, electrical connections, and verified proper operation of all components including condensate system and burner assembly.
Conducted comprehensive assessment of HVAC system with uneven heat distribution throughout residence. Inspected existing ventilation components, noting absence of individual vent control valves and lack of proper labeling. Documented condition of multiple vents showing signs of wear and deterioration, with recommendation for replacement and installation of adjustable dampers to facilitate balanced airflow management.
Responded to no-heat call for garage heating system. Diagnostic inspection revealed functioning control board with normal blue LED indicator lights. Confirmed proper operation of exterior wall vent with no obstruction. System restored to normal operation after cleaning and adjustment.
Performed comprehensive heating tune-up on residential furnace system. Conducted electrical diagnostics using Fieldpiece clamp meter to verify proper voltage/amperage at control boards and blower assembly. Measured supply air temperature (61.5°F) with ThermPro digital thermometer, indicating system is operating within normal parameters.
Responded to no-heat call for 8-year-old steam boiler. Inspected system and identified oxidation on copper piping connections. Performed maintenance service, checked pressure levels, and restored proper operation of heating system.
Completed biannual heating maintenance service on dual HVAC systems. Performed comprehensive inspection of ductwork, copper supply lines, and ventilation components in utility area. Conducted electrical testing with Fieldpiece SC680 clamp meter, verifying proper amperage readings of 32.3 on system components to ensure optimal performance for heating season.
Completed second service call to perform skimming operation on boiler system for 2 hours. Accessed heating cavity to inspect parallel cylindrical tubes and burner assembly. Verified proper functionality of heating elements and inspected wiring integrity, with particular attention to the orange control wire running through the system.
Performed routine maintenance on furnace system as recommended by manufacturer guidelines. Inspected burner assembly and verified proper flame pattern with even blue combustion across all ports. Customer opted to renew maintenance plan for continued coverage of furnace, A/C and hot water tank.
Performed scheduled heating maintenance on system per Home Plan agreement. Inspected blower assembly and confirmed proper operation with no abnormal noise or vibration. Examined burner assembly and heat exchangers; all flame patterns normal with no signs of corrosion or carbon buildup.
