HVAC & Plumbing Services in Shaker Heights

Completed routine cooling maintenance on 8-year-old air conditioning system under home plan plus coverage. Performed standard inspection of attic-mounted HVAC components including supply plenum, flex ductwork connections, and insulation integrity. All system components found in satisfactory operating condition with no deficiencies noted.

Completed preventative maintenance tune-up on two residential air conditioning systems. Performed comprehensive system diagnostics including refrigerant pressure and temperature measurements, verified proper superheat and subcooling levels, inspected condenser coils, and tested all operational parameters to ensure optimal performance and efficiency for both units.

Completed comprehensive AC tune-up for new customer with no reported issues. Performed standard preventive maintenance including inspection of outdoor condenser unit located in overgrown vegetation, checked refrigerant levels, cleaned coils, and verified proper system operation. Inspected indoor air handler and ductwork in attic space, confirming adequate insulation and airflow. System operational and running efficiently upon completion.

Responded to service call for toilet replacement evaluation. Upon arrival, inspected existing toilet with electronic bidet seat attachment and identified customer's request for replacement quote. Documented current installation including bidet functionality, water supply connections, shut-off valve condition, and floor mounting configuration. Assessed plumbing infrastructure behind fixture, noting flexible supply line connections to wall-mounted brass shut-off valves and existing floor conditions for potential replacement work. Photographed installation details to provide accurate replacement estimate including bidet seat considerations and any necessary plumbing modifications.

Completed comprehensive cooling system maintenance on air handler and air conditioning unit under maintenance plan agreement. Performed standard tune-up procedures including inspection of blower wheel assembly, motor components, and evaporator coil. All components found operating within normal parameters with no issues identified or repairs required at time of service.

Completed annual preventative maintenance on three residential air conditioning systems. Performed comprehensive tune-up procedures including refrigerant pressure and temperature measurements using digital manifold gauges, verified system operating temperatures at supply vents, inspected electrical connections, cleaned condensate drains, and confirmed proper airflow across all units. All three systems tested within normal operating parameters and are functioning properly for the cooling season.

Completed installation of brass wall-mounted faucet valves and fixtures on bathroom vanity with granite countertop. Installed escutcheon plates, valve stems, and connected chrome supply lines to ensure proper water flow to sink basin. All fixtures secured and tested for functionality.

Completed annual preventative maintenance on both heating and air conditioning systems. Performed comprehensive tune-up including system diagnostics, electrical testing with multimeter, inspection of all components, and verification of proper operation. Both systems found to be functioning within normal parameters with no issues identified.

Inspected toilet tank and shower valve assembly to provide repair estimates. Evaluated Glacier Bay toilet internal flushing mechanism, including black plastic float assembly, flapper seal, and fill valve for proper operation and potential replacement needs. Assessed Delta Monitor single-handle shower mixing valve with chrome trim plate and control handle for functionality and repair requirements. Documented existing conditions including minor water staining and mineral deposits in toilet tank, and typical wear patterns on shower valve components. All necessary replacement parts identified for future repair work.

Responded to repeat furnace failure call. Upon inspection, found control board and ignition system components requiring diagnostic evaluation. Accessed unit interior, inspected wiring connections, ground wire installations, and flame sensor assembly (LMS350601). Reviewed LED diagnostic code reference label to troubleshoot system malfunction. Documented internal component configuration and electrical connections for service records.

Replaced failed compressor on upstairs air conditioning unit under manufacturer parts warranty. Recharged system with R-410A refrigerant and verified proper pressures using digital gauges. System tested and operating within normal parameters upon completion.

Completed scheduled cooling system tune-up and preventive maintenance inspection. Examined outdoor condenser unit coil assembly, noting moderate dust and debris accumulation on aluminum heat exchanger fins affecting airflow efficiency. Documented current condition of finned coil surfaces showing typical operational wear and environmental exposure consistent with regular system use.

Performed comprehensive AC tune-up on 3-year-old cooling system. Completed full maintenance protocol including inspection of condenser fan assembly, verified proper blade alignment and hub integrity, checked refrigerant levels, cleaned components, and tested system operation. All systems functioning within normal parameters with no issues found.

Responded to no-heat call on Carrier HVAC system. Upon arrival, diagnosed and resolved issue preventing system startup. Confirmed furnace now operating properly with all burners igniting and functioning correctly. Completed requested preventative maintenance service on both heating and cooling components per manufacturer specifications.

Completed routine spring maintenance and tune-up on a 9-year-old residential air conditioning system. Performed comprehensive inspection of outdoor condenser unit, verified proper operation of all components, checked refrigerant levels, cleaned coils, and tested electrical connections. Unit is functioning within normal parameters with no issues identified; system is well-maintained and ready for the cooling season.

Completed comprehensive cooling system maintenance on 21-year-old air conditioning unit located in basement utility area. Performed standard tune-up protocol including inspection of indoor air handler unit, verified operational status with power indicators functioning properly, checked filtration components and intake mesh screens for cleanliness and proper airflow, and examined unit housing for structural integrity. All system components found to be operating within normal parameters with no immediate service needs identified.

Performed complete condenser cleaning service on outdoor AC unit. Unit was accessed at exterior location against brick wall, where significant debris accumulation was found affecting system performance. Thoroughly cleaned condenser coils, removed dirt and organic matter from unit exterior and surrounding area. Inspected all accessible components during cleaning process. No replacement parts were required to complete this maintenance service. Customer was advised scheduling took approximately two hours and was informed service would be completed after 10 AM. Unit operational and ready for continued service upon completion.

Completed estimate for replacement of existing two-system HVAC setup. Assessed current basement installation featuring Lennox furnace with PVC venting and auxiliary equipment including water heater and filter housing. Evaluated outdoor equipment including Lennox air conditioning unit and secondary AC system positioned on gravel pad against building exterior. Documented existing equipment condition, installation configuration, and replacement requirements for dual-zone cooling system upgrade.

Responded to service call for boiler leaking hot water from bottom, upper left-hand corner. Upon arrival, parked in back of driveway per customer request and proceeded to basement mechanical room to inspect the heating system. Located gray metal boiler unit elevated on concrete blocks with dual exhaust pipes and associated plumbing connections. Conducted thorough visual inspection of the boiler assembly, examining all pipe connections, valves, and fittings in the affected area. Documented equipment condition through photographs showing the boiler installation, surrounding piping infrastructure including copper and PVC lines, and overall mechanical room layout. Assessed leak source and severity to determine appropriate repair recommendations and provided estimate for necessary corrective action to resolve the hot water leak issue.

Replaced primary and secondary washer shut-off valves in basement utility area. Installed new copper piping with brass fittings and red-handled manual control valves to provide reliable water flow control to washing machine connections. Work completed as part of coordinated multi-visit repair schedule requiring city clearance approval, with all new plumbing components properly secured and tested for proper operation.