HVAC & Plumbing Services in Lyndhurst

Responded to no-cool call for 2-year-old residential central air conditioning system that was completely non-operational. Upon arrival, performed diagnostic assessment of outdoor condensing unit and associated electrical components. Identified power supply issue preventing system startup, restored proper electrical connection, and verified full system operation with normal cooling cycle restored to entire home.

Responded to priority first-call appointment to replace leaking air conditioning system in residential basement mechanical room. Removed and replaced aging AC unit that had developed refrigerant leak of undetermined age. New installation completed alongside existing furnace system that was previously upgraded in 2023, ensuring proper integration with current ductwork, condensate drainage lines, and electrical connections. All PVC piping, refrigerant lines, and duct connections secured and tested for proper operation.

Responded to service call for banging noise in ductwork when AC system starts. Performed thorough inspection of HVAC system, air handler, and associated ductwork connections. Identified loose or improperly secured duct sections causing noise during system startup due to air pressure changes. Secured all ductwork connections, tightened mounting hardware, and verified proper support throughout accessible duct runs. Cycled system multiple times to confirm noise elimination and proper operation. System now operating quietly with no abnormal sounds during startup or runtime.

Provided comprehensive estimate for complete HVAC system replacement of aging 19+ year old furnace and air conditioning equipment. Evaluated existing basement-installed furnace with associated ductwork, humidifier, and outdoor condenser unit positioned on concrete pad against exterior wall. Assessed current system configuration including galvanized metal ductwork, copper refrigerant lines, PVC condensate drainage, and electrical disconnect components to determine replacement specifications and installation requirements for new high-efficiency heating and cooling system.

Completed Stage 2 of furnace installation in residential property with basement location. Installed new heating system and connected all ductwork to existing white cylindrical supply runs visible in ceiling area. Addressed structural concerns related to water-damaged wooden framing and deteriorated ceiling materials in work vicinity. Mounted and programmed new digital smart thermostat on main level wall, configured temperature settings to 72°F with scheduled programming to 68°F until 3:05 PM. Verified proper system operation, airflow through supply ducts, and thermostat communication with new furnace unit. Completed all electrical connections and tested heating cycle for proper ignition and temperature control functionality.

Completed preventive maintenance on 11-year-old heat pump system. Performed comprehensive tune-up inspection of outdoor unit including refrigerant line assessment, electrical connections verification, and condenser coil evaluation. Customer renewed maintenance agreement on-site, and this service will be applied under the renewed contract.

Completed preventative maintenance on 4-year-old Bryant air conditioning system for first-time service customer. Performed comprehensive inspection of outdoor condensing unit, verified proper operation of all components, checked refrigerant levels, cleaned condenser coils, and confirmed system is operating within manufacturer specifications.

Conducted estimate for HVAC system replacement due to no cooling condition. Evaluated existing furnace and air conditioning equipment in basement mechanical room, documented current system configuration including ductwork connections and electrical service. Provided replacement options and recommendations for new heating and cooling system installation.

Responded to service call for seven-year-old air conditioning unit experiencing short cycling issues. Upon inspection, performed thorough system cleaning as requested and evaluated electrical components including the capacitor (TOTALINE P291-4054RS, 40x5 MFD, 370 VAC) and contactor assembly. Conducted amperage testing using clamp meter to verify proper current draw and confirm system operation was restored to normal cycling parameters.

# Mini Split Installation Successfully completed installation of ductless mini split system in residential property. Installed refrigerant line set and electrical conduit through attic space, securing all components to structural framing per manufacturer specifications. Routed condensate drain line and communication wiring alongside refrigerant lines using appropriate fastening methods. Mounted indoor air handler unit and verified proper clearances for optimal airflow distribution. Connected outdoor condensing unit and performed vacuum test on refrigerant lines to ensure system integrity. Charged system with refrigerant and completed startup procedures. Verified system operation with temperature differential readings showing 72°F at the indoor unit, confirming proper heating performance. All electrical connections completed in accordance with local code requirements. System tested and left in full operational condition.

Responded to plumbing service call at a 60-year-old residential property for reported leak and clog issues. Upon arrival, conducted thorough inspection of bathroom plumbing system, focusing on toilet area and floor drainage components. Identified significant water staining and rust buildup around floor drain, indicating chronic moisture exposure and potential drainage problems. Assessed toilet installation, water supply lines, and bidet attachment connections for signs of active leaks or deterioration. Cleared clog from floor drain system, removing accumulated debris and mineral deposits contributing to poor drainage and water backup. Addressed rust and corrosion issues on drain fixture, which had caused extensive staining on surrounding tile surfaces. Inspected all visible plumbing connections in bathroom, including toilet supply line, bidet water supply hose, and shut-off valves for proper operation and leak-free performance. Verified all fixtures were functioning correctly and

Conducted on-site evaluation of existing residential HVAC system for equipment replacement estimate. Documented current furnace installation, ductwork configuration, and mechanical room conditions. Assessed accessibility, electrical connections, and existing infrastructure to provide accurate replacement recommendations and specifications.

Responded to no cooling complaint on 22-year-old residential air conditioning system original to home construction. Performed diagnostic assessment of Bryant HVAC system including furnace, air handler, and associated ductwork in basement mechanical room. Evaluated system operation, inspected electrical connections, refrigerant lines, condensate drainage, and airflow components to identify cause of inadequate cooling performance affecting entire home.

Performed comprehensive AC tune-up on aging system estimated to be original to building from approximately 1999. Connected refrigerant manifold gauges to measure system pressures and temperatures, verifying proper refrigerant charge and compressor operation. All readings within acceptable parameters, unit operating efficiently with no issues found or repairs needed.

Completed annual preventative maintenance tune-up on two-year-old air conditioning system prior to cooling season startup. Performed comprehensive system inspection including condenser coil assessment, refrigerant pressure measurements, electrical component testing, and operational verification. All components found operating within normal parameters with no issues identified; system ready for seasonal operation.

# AC Tune-Up Completed Performed comprehensive tune-up on 17-year-old R-410A air conditioning system. System pressures measured at 119.0 PSIG low side and 322.7 PSIG high side using refrigerant manifold gauge. Superheat reading of 22.9°F and subcooling of 93°F recorded during diagnostic testing. Inspected condenser coil and verified unit specifications on data plate (Model: DNPVP6024ALAAAAA, manufactured December 2019). All routine maintenance procedures completed per manufacturer specifications, and system operational parameters documented for future reference.

Responded to service call for water heater replacement in residential basement. Upon arrival, assessed existing 15-20 year old tanked water heater showing signs of age and end of service life. Provided estimate for complete water heater replacement with same-day installation capability. Documented existing unit specifications, plumbing connections including copper supply lines, and installation location in basement utility area for replacement planning.

Completed summer AC tune-up on residential air conditioning system of unknown age. Unit was operating properly upon arrival with no reported issues. Performed comprehensive preventive maintenance inspection including temperature differential measurements, which confirmed system operating at 70.8°F discharge temperature. Inspected outdoor condenser unit, verified proper operation of all components, and documented system performance with thermal readings to establish baseline operating parameters for future service reference.

Completed comprehensive AC tune-up and maintenance on 5-year-old cooling system with no reported issues. Performed thorough inspection of blower wheel assembly, confirming proper blade alignment and airflow capacity with minimal dust accumulation noted. Verified system operation with supply air temperature reading of 73.5°F at exterior refrigerant line, indicating normal system performance. All components functioning within manufacturer specifications.

Completed seasonal air conditioning startup and spring maintenance tune-up on residential cooling system. Performed comprehensive system inspection, checked refrigerant pressures using manifold gauges, verified proper operation of condenser unit and air handler, and confirmed all components functioning within normal parameters. Seasonal furnace shutdown completed; fall/winter preventive maintenance for heating system to be scheduled at later date.