HVAC & Plumbing Services in Shaker Heights

Completed comprehensive cooling tune-up on 15-year-old air conditioning system. Performed full system diagnostics using digital manifold gauges to measure refrigerant pressures and temperatures, verifying proper operating conditions and system performance. Condenser unit inspected and found in good working condition with clean coils and proper airflow through louver fins.

Performed routine cooling system maintenance on air conditioning unit less than 10 years old. Connected refrigerant manifold gauges to measure system pressures and temperatures, verifying proper refrigerant charge levels and overall system performance. All readings were within normal operating parameters, and system is functioning as designed.

Performed routine cooling system maintenance on residential outdoor condensing unit. Conducted diagnostic measurements using refrigerant manifold and micron gauge, verifying system temperatures, pressures, and humidity levels. Inspected evaporator coil condition, confirmed fins were clean and free of debris. Unit operating within normal parameters with proper refrigerant charge and airflow.

Conducted estimate for HVAC system replacement after unit sustained irreparable damage from ice falling off roof. Assessed existing Carrier furnace and associated equipment in basement mechanical room, documented damage with photos, and provided replacement recommendations for damaged components.

Recovered existing R-410A refrigerant from system and evacuated to proper vacuum levels. Recharged system with factory specification of 7.5 lbs of R-410A refrigerant plus UV dye for leak detection purposes, adjusting charge to manufacturer specifications. Follow-up visit scheduled in several weeks to perform comprehensive leak search using UV detection method, with customer understanding that dye may require additional time to circulate and identify leak location.

Responded to multiple drainage issues in a century-old home where the sink, shower, and toilet were all experiencing problems in the same area. Inspected the toilet tank mechanism, identifying potential flush valve and flapper issues that may have been contributing to the toilet malfunction. Addressed slow drainage and backup concerns affecting the interconnected plumbing fixtures in the aging system.

Completed comprehensive cooling system maintenance on 1-year-old air conditioning unit, including refrigerant pressure and temperature diagnostics using digital manifold gauges. All system parameters were measured and verified to be within manufacturer specifications, ensuring optimal performance and efficiency for continued reliable operation.

Responded to service call for 5-year-old air conditioning unit rendered inoperable after impact from falling ice caused severe denting to top housing, preventing fan blade rotation. Upon inspection, documented extensive physical damage to condenser unit cabinet and fan guard assembly with photographic evidence. Unit assessed as non-functional due to structural compromise; photos forwarded to management for evaluation regarding repair feasibility versus replacement recommendation.

Responded to no hot water issue from shower mixing valve in century-old home. Upon inspection, found vintage Kallista shower control fixture with significant age-related wear and tarnishing affecting valve operation. Accessed plumbing system through existing wall panel in adjacent room to diagnose and address mixing valve malfunction, restoring proper hot water delivery to the shower fixture.

Responded to insurance diagnostic request for 20-year-old Carrier WeatherMaker Infinity air conditioning system reportedly damaged by falling ice block. Performed visual inspection and photographic documentation of outdoor condenser unit, noting weathered condition consistent with age, accumulated debris on fan grille, and rust spots on casing and corners. Assessed top-mounted fan assembly, grille integrity, and motor housing for impact damage, documenting findings for insurance claim purposes.

Performed routine maintenance on tanked water heater as part of recurring home plan service. Completed standard flush procedure to remove sediment buildup from tank, inspected unit for proper operation, and verified all connections and components were functioning correctly.

Completed comprehensive AC tune-up on residential cooling system less than one year old. Performed refrigerant pressure and temperature diagnostics using digital manifold gauge at evaporator coil, verifying proper system charge levels, superheat, and subcooling values within manufacturer specifications. All components operating normally with no deficiencies noted.

Completed comprehensive cooling maintenance on five HVAC systems at residential property. Two units located in attic space accessed with ladder, three units positioned outside. Performed standard preventative maintenance procedures including filter inspection, coil cleaning, refrigerant pressure and temperature readings, electrical component testing, and condensate drain verification. Utilized refrigerant manifold gauge set to measure system pressures and temperatures across multiple units, confirming proper refrigerant charge levels and system operation. All units inspected for proper airflow, ductwork integrity, and equipment mounting stability. Systems tested and verified operational upon completion of maintenance service.

Responded to service call for 50-gallon Lochinvar water heater experiencing slow leak in basement utility area. Completed full replacement of existing tanked water heater unit, including disconnection of copper supply lines, drainage of old tank, and installation of new 50-gallon residential water heater with proper venting and code-compliant connections to existing plumbing system.

Inspected basement boiler piping system and identified exposed hot water supply and return lines requiring insulation to improve energy efficiency and prevent heat loss. Consulted with property contact regarding insulation specifications and documented current conditions of uninsulated white PVC and gray metal piping running through exposed ceiling joists above unfinished basement area. Recommended proper pipe insulation installation to meet code requirements and optimize system performance.

Conducted on-site assessment for mini split system installation to address inadequate cooling in upstairs bedroom area. Evaluated current HVAC system performance, documented room layout and dimensions, and provided multiple equipment options to resolve comfort issues in the second-floor living space.

Completed comprehensive AC tune-up and preventative maintenance on a 4-year-old cooling system that was operating properly at time of service. Performed standard maintenance protocol including inspection of evaporator coil assembly where normal condensation was observed on metallic surfaces, verified blower wheel condition and cleanliness with all curved fins intact and functioning correctly, and inspected air return grille components confirming proper installation and secure mounting. All HVAC components examined showed appropriate operation with no deficiencies noted, system left in optimal working condition for continued reliable cooling performance.

Completed preventive maintenance cooling tune-up on residential air conditioning system over 10 years old utilizing R-410A refrigerant. Inspected evaporator coil module (Model M4866CJ.1_B) and verified manufacturer specifications including design pressure ratings of 250 PSIG low side and 500 PSIG high side. Performed diagnostic measurements using digital manifold gauges, recording system temperatures and pressures to ensure proper refrigerant charge and operational efficiency within manufacturer parameters.

Responded to service call for clogged bathroom sink where customer had previously attempted to clear blockage with liquid drain cleaner without success. Upon arrival, assessed the pedestal sink and exposed plumbing beneath, cleared the obstruction, and restored proper drainage to the fixture.

Completed preventive maintenance on two boiler systems including primary 8-12 boiler and secondary baby boiler unit. Performed comprehensive heating tune-up procedures on both systems, conducted combustion analysis testing with digital analyzer showing CO levels at 8.0%, CO2 at 7.8%, and flue temperature at 299.1°F. Inspected Weil-McLain EG series boiler components, verified proper operation of electronic controls, tested all safety switches and indicators, examined gas connections and copper piping, confirmed proper venting, and documented all system parameters within acceptable operating ranges.